Banner Engineering World-Beam® QS30LD Photoelectric Sensor, Rectangular Shape, 400 mm Sensing, Visible Red Sensing Beam
Photoelectric Proximity Sensors
141800
MFG #: QS30LD
BANNER®
204.25000
/ ea
Banner Engineering World-Beam® Photoelectric Sensor, Series: QS30LD, Rectangular, Diffuse Sensing Method, 400 mm Sensing Range, Visible Red Sensing Beam, 0.5 ms Response, Bi-Polar Output, 10/30 VDC, 35 mA, Cable, LED Light Source, 10 to 60 Hz, 44 mm H x 22 mm W x 32.5 mm D, NEMA 6/IP67, -20 to 70 deg C Operating, Environmental Conditions: 95% at 50 deg C
- Features
| Housing style: Rectangular with M30 barrel; Adjustments: Teach button; Visible laser beam for diffuse sensing; Excellent optical performance throughout sensing range, even close up; Excellent optical performance throughout sensing range, even close up; Easy-to-read operating status indicators, with 8-segment bargraph display; Bipolar discrete outputs, PNP and NPN; Selectable 30 MS off-delay; Compact housing, mounting versatility-popular 30 MM threaded nose or side-mount; Protected against reverse polarity and transient voltages; Indicators: Large, oval LED indicator on sensor back, output conducting (yellow); Small indicator on back (adjustable-field only), end of travel (EOT) LED (blue/red); 2 Indicators on top, power on (green) and light sensed (yellow) |
| Excellent optical performance throughout sensing range, even close up |
| Easy-to-set expert-style TEACH options including static, dynamic, and single point programming plus manual adjustment for fine-tuning |
| Compact housing, mounting versatility - popular 30 mm threaded nose or side-mount |
| Selectable 30 ms off-delay |
| Easy-to-read operating status indicators, with 8-segment bargraph display |
| Teach button adjustments |
| Protected against reverse polarity and transient over voltages |
| Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up |
| 10 - 60 Hz maximum, double amplitude 0.06 in, maximum acceleration 10 gohm vibration |
| 150 mA maximum load, less than 1V at 150 mA maximum load (NPN), less than 2 V at 150 mA(PNP) ON-state saturation voltage |
| QS30 series diffuse mode photoelectric sensor |
| Less than 10 uA at 30 VDC off-state output leakage |
| 0.5 ms on/off response time |
| 650 nm visible laser beam for diffuse sensing |
| Acrylic lens, 95 percent at 55 deg C (non-condensing) relative humidity |
| 5-wire 2 m cable connection |
| ABS thermoplastic enclosure |
| Light/dark operate, bipolar (NPN and PNP) output |
| 30 mm barrel diameter |