Banner Engineering SM912LVQD Valu-Beam® 912 Photoelectric Sensor, Rectangle Shape, 0.15 to 9 m Sensing, Visible Red Sensing Beam
Photoelectric Retroreflective Sensors
13413
MFG #: SM912LVQD
BANNER®
237.98000
/ ea
Banner Engineering Valu-Beam® Photoelectric Sensor, Series: 912, Rectangle, Retro Reflective Sensing Method, 0.15 to 9 m Sensing Range, Visible Red Sensing Beam, 4 ms Response, Bi-Polar Output, 10/30 VDC, 20 mA, Quick-Disconnect, LED Light Source, 36.6 mm L x 35.6 mm W x 77.5 mm H, NEMA 1/2/3/3S/4/4X/12/13/IP66, -20 to 70 deg C Operating, Environmental Conditions: 90 Percent at 50 deg C
- Features
| Include banner's Alignment Indicating Device (AID™) system; Protected against reverse polarity and transient voltages; Stainless steel hardware; Potentiometer located at rear of sensor |
| Protected against reverse polarity and transient voltages |
| Stainless steel hardware |
| All models have a rear panel sensitivity adjustment and light/dark operate switch |
| Include banners Alignment Indicating Device (AID™) system |
| Non-polarized retroreflective mode photoelectric sensor |
| Less than 10 uA off-state output leakage current |
| 4 ms on/off response time |
| 650 nm visible red LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 4-pin mini-style quick disconnect connection |
| Reinforced thermoplastic polyester enclosure |
| Light/dark operate, bipolar (NPN and PNP) output, 250 mA continuous, PNP - less than 1 v at 10 mA and less than 2 v at 250 mA, NPN - less than 200 mV at 10 mA and less than 1 v at 250 mA output saturation voltage |