Rectangular with M18 barrel housing style; Compact, modulated, highly repeatable sensors; Switch-selectable for light operate or dark operate; Includes Banner's exclusive AID™ alignment system; Rugged, epoxy-encapsulated, totally encapsulated, O-ring sealing, and stainless steel screws construction; Physically and electrically interchangeable with 18 MM barrel-type photoelectric; Protected against reverse polarity, transient voltages and against false pulse on power-up and continuous overload or short-circuit of outputs; Controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover; The NPN (current sinking) output of DC MINI-BEAM sensors is directly compatible as an input to Banner logic modules, including all non-amplified MAXI-AMP and MICRO-AMP modules, MINI-BEAMs are TTL compatible |
Compact, modulated, self-contained diffuse proximity mode sensors |
Switch-selectable for light operate or dark operate |
Includes Banners exclusive AID™ alignment system |
Highly repeatable 1 msond response |
Rugged, epoxy-encapsulated construction |
Physically and electrically interchangeable with 18 mm barrel-type photoelectric |
15-turn slotted brass screw GAIN (sensitivity) adjustment potentiometer (clutched at both ends of travel), both controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover adjustments |
Exclusive, patented alignment indicating device system (AID, US patent no 4356393) lights a rear-panel mounted red LED indicator whenever the sensor sees a light condition, with a superimposed pulse rate proportional to the light signal strength (the stronger the signal, the faster the pulse rate) |
Industry standard mounting holes |
Both sourcing and sinking outputs (150 mA max. each), continuous overload and short-circuit protected |
Stainless steel screws, 18 mm barrel diameter |
Protected against false pulse on power-up and continuous overload or short-circuit of outputs |
Self-contained diffuse mode photoelectric sensor |
Less than 1 uA off-state output leakage, less than 25 mA |
Sensors will respond to either a light or dark signal of 1 ms or longer duration, 500 Hz maximum |
880 nm Infrared LED sensing beam |
Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
4-pin euro-style quick disconnect connection |
Reinforced thermoplastic polyester enclosure |
Light/dark operate, bipolar (NPN and PNP) output, 150mA maximum each output at 25 deg C, derated to 100 mA at 70 deg C, (PNP output) less than 1 V at 10 mA and less than 2 volts at 150mA, (NPN output) less than 200 mV at 10mA and less than 1 V at 150 mA output saturation voltage |