Banner Engineering SM312CV2 Mani-Beam® SM312 Photoelectric Sensor, Rectangular Shape, 43 mm Sensing, Visible Red Sensing Beam

Photoelectric Proximity Sensors
13479 MFG #: SM312CV2
BANNER®
161.00000 / ea
QTY
  • Features
Compact, modulated, self-contained convergent mode sensors; Produces a precise 3 MM sensing spot at 43 MM focus; Includes Banner's exclusive AID alignment system; Highly repeatable; Rugged, epoxy-encapsulated construction; Physically and electrically interchangeable with 18 MM barrel-type photoelectrics; Adjustments: 15-turn slotted brass screw GAIN (sensitivity) adjustment potentiometer (clutched at both ends of travel), both controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover; Indicators: Exclusive, patented Alignment Indicating Device system (AID, US patent #4356393) lights a rear-panel mounted red LED indicator whenever the sensor sees a light condition, with a superimposed pulse rate proportional to the light signal strength (the stronger the signal, the faster the pulse rate); Stainless steel screws"
Compact, modulated, self-contained diffuse proximity mode sensors
Switch-selectable for light operate or dark operate
Includes Banners exclusive AID™ alignment system
Highly repeatable 1 msond response
Rugged, epoxy-encapsulated construction
Physically and electrically interchangeable with 18 mm barrel-type photoelectric
15-turn slotted brass screw GAIN (sensitivity) adjustment potentiometer (clutched at both ends of travel), both controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover adjustments
Exclusive, patented alignment indicating device system (AID, US patent no 4356393) lights a rear-panel mounted red LED indicator whenever the sensor sees a light condition, with a superimposed pulse rate proportional to the light signal strength (the stronger the signal, the faster the pulse rate)
Industry standard mounting holes
Produces a precise 3 mm sensing spot at 43 mm focus
Stainless steel screws, 18 mm barrel diameter
Protected against false pulse on power-up and continuous overload or short-circuit of outputs
Self-contained proximity convergent mode photoelectric sensor
Less than 1 uA off-state output leakage, less than 25 mA
Sensors will respond to either a light or dark signal of 1 ms or longer duration, 500 Hz maximum
650 nm visible red LED sensing beam
Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity
2 m cable connection
Reinforced thermoplastic polyester enclosure
Light/dark operate, bipolar (NPN and PNP) output, 150mA maximum each output at 25 deg C, derated to 100 mA at 70 deg C, (PNP output) less than 1 V at 10 mA and less than 2 volts at 150mA, (NPN output) less than 200 mV at 10mA and less than 1 V at 150 mA output saturation voltage