Banner Engineering SM2A912LVAGQD Valu-Beam® 912 Photoelectric Sensor, Rectangle Shape, 0.3 to 4.5 m Sensing, Visible Red Sensing Beam
Photoelectric Retroreflective Sensors
139556
MFG #: SM2A912LVAGQD
BANNER®
308.25000
/ ea
Banner Engineering Valu-Beam® Photoelectric Sensor, Series: 912, Rectangle, Retro Reflective Sensing Method, 0.3 to 4.5 m Sensing Range, Visible Red Sensing Beam, 4 ms Response, Switch Output, 24/250 VAC, 20 mA, 50/60 Hz, Quick-Disconnect, LED Light Source, 36.6 mm L x 35.6 mm W x 77.5 mm H, NEMA 1/2/3/3S/4/4X/12/13/IP66, -20 to 70 deg C Operating, Environmental Conditions: 90 Percent at 50 deg C
- Features
Protected against transient voltages and false pulse on power-up; Stainless steel hardware; 912 Series ac sensors can be destroyed from overload conditions; Use on low voltage requires careful analysis of the load to determine if the leakage current or on-state voltage of the sensor will interfere with proper operation of the load; The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts; Potentiometer located at rear of sensor |
Less than or equal to 5 V RMS at 750 mA load and less than or equal to 10 V RMS at 15 mA load on-state voltage drop |
Protected against transient voltages and false pulse on power-up |
Stainless steel hardware |
912 Series ac sensors can be destroyed from overload conditions |
Use on low voltage requires careful analysis of the load to determine if the leakage current or on-state voltage of the sensor will interfere with proper operation of the load |
The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts |
Potentiometer located at rear of sensor |
912 series polarized retroreflective mode photoelectric sensor |
Less than 1.7 mA off-state output leakage |
4 ms on/off response time |
650 nm visible red LED sensing beam |
Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
3-pin mini-style quick disconnect connection |
Reinforced thermoplastic polyester enclosure |
Light/dark operate |
SPST SCR solid-state 2-wire output, 10 mA minimum load current, 750 mA to 50 deg C, 500 mA to 70 deg C maximum steady-state load capability, 4 A for 1 Sec (non-repetitive) inrush capability |