| Safety switch is integrated and encapsulated into a load-bearing hinge, providing a high degree of protection from intentional defeat; Identical in appearance to non-switching blank hinge; Switch components concealed inside the hinge are protected from mechanical impact, providing superior performance to actuator-activated safety switches, rated IEC IP67; Hinge operates to a full 180 ° range of motion, safety switching point (guard-closed position) is adjustable over the full 0 - 180 ° operating range; Robust zinc die-cast housing is corrosion resistant; Short circuit protection: 6 AMP slow blow, 10 AMP fast blow, recommended external fusing or overload protection |
| Safety switch is integrated and encapsulated into a load-bearing hinge, providing a high degree of protection from intentional defeat |
| Identical in appearance to non-switching blank hinge |
| Switch components concealed inside the hinge are protected from mechanical impact, providing superior performance to actuator-activated safety switches, rated IEC IP67 |
| Hinge operates to a full 180 deg range of motion, safety switching point (guard-closed position) is adjustable over the full 0 - 180 deg operating range |
| When properly interfaced or used with an appropriate controller, two SI-HG80D..switches can achieve safety category 4, per ISO 13849 (EN 954-1) |
| Robust zinc die-cast housing is corrosion resistant |
| 6 A slow blow, 10 A fast blow short circuit protection, recommended external fusing or overload protection |
| Zinc die-cast |
| 3 A at 250 VAC maximum, 0.5 A at 60 VDC maximum |
| -25 to 70 deg C Operating |
| 1 NO, 1 NC auxiliary contact configuration |
| Flat actuator |
| 1000000 operating cycles |
| 4 pin micro-style quick disconnect connection |
| With Load bearing hinge |
