| Zero-force activated photoelectric replacements for mechanical push buttons |
| Momentary action touch buttons with SPDT electromechanical relay |
| Optimized for easy mounting with a 30 mm threaded base |
| Ergonomic design eliminates hand, wrist and arm stress |
| Field covers included to prevent inadvertent activation from loose clothing, debris |
| Highly resistant to both single and mixed EMI and RFI noise sources |
| Protected against reverse polarity and transient voltages |
| 100 ms delay on power-up, outputs do not conduct at this time |
| Protected against false pulse on power-up and continuous overload or short circuit of outputs |
| Two indicator LEDs, one lights whenever power is applied, the other lights whenever the switch is activated |
| Electronics fully epoxy-encapsulated fiber reinforced polyester base |
| Threaded base has M30 x 1.5 external threads and 1/2 in NPSM internal threads |
| Base requires a 1-3/16 in diameter mounting hole (fits most standard automotive size jumbo legend plates and oil tight pushbutton holes) |
| Up to 100000 lux ambient light immunity |
| Maximum voltage is 250 VAC/30 VDC maximum voltage, maximum current is 7 A (resistive load), 1 hp maximum |
| Minimum load is 0.05 W (DC), 0.05 VA (AC) |
| Mechanical life of relay is 50000000 operations (minimum) |
| Electrical life of relay is 100000 operations (minimum) at full resistive load |
| Transient suppression recommended when switching inductive loads |
| PVC jacketed 22 AWG 5-conductor 2 m cable |
