| EZ-SCREEN point-of-operation systems provide finger, hand and ankle detection in a robust housing and metal endcaps; Displays operating status, configuration error codes, and blocked beams; Resists impact, twisting, and abusive environments with durable aluminum housing or nickel-plated ESD-safe housing for protection against electrostatic discharges; Cascading models allow four systems of any length and resolution to be connected in a series, forming a single safety device; IP65 extruded aluminum housing with yellow polyester powder finish standard and well-sealed, rugged die-cast zinc end caps, co-polyester access cover; Remote test input- high signal: 10 - 30 VDC, low signal: 0 - 3 VDC, input current: 35 MILAMP inrush, 10 MILAMP maximum; Reset input- high signal: 10 - 30 VDC At 30 MILAMP typical, low signal: 0 - 3 VDC, closed switch time: 0.25 - 2 S; EDM input |
| EZ-SCREEN point-of-operation systems provide finger, hand and ankle detection in a robust housing and metal end caps |
| Displays operating status, configuration error codes, and blocked beams |
| Resists impact, twisting, and abusive environments with durable aluminum housing or nickel-plated ESD-safe housing for protection against electrostatic discharges |
| Cascading models allow four systems of any length and resolution to be connected in a series, forming a single safety device |
| IP65 extruded aluminum housing with yellow polyester powder finish standard and well-sealed, rugged die-cast zinc end caps, co-polyester access cover |
| Remote test input- high signal 10 - 30 VDC, low signal 0 - 3 VDC, input current 35 mA inrush, 10 mA maximum |
| Reset input- high signal 10 - 30 VDC At 30 mA typical, low signal 0 - 3 VDC, closed switch time 0.25 - 2 S |
| EDM input- high signal 10 - 30 VDC at 30 mA typical, low signal 0 - 3 VDC |
| All inputs and outputs are protected from short circuits to 24 VDC or DC common |
| Electrical safety class III |
| EZ-Screen components have passed vibration and shock tests according to IEC 61496-1 |
| This includes vibration (10 cycles) of 10 - 55 HZ at 0.35 MM single amplitude (0.70 MM peak-to-peak) and shock of 10 G for 16 MS (6000 cycles) |
| 10 - 30 VDC at 30 mA typical reset input high signal, 0 - 3 VDC low signal |
| 2 PNP (trip/latch) safety output rating |
| 100 mA maximum emitter power supply |
| (2) 8 GA Black Zinc Cold-Rolled Steel Swivel End Brackets mounting |
| M12 |
| 30 mm resolution |
| 950 NMTR infrared LED light source |
| Plus/minus 2.5 deg at 3 m. Yellow polyester powder |
