| Serve as pulling fittings; Make bends in conduit system; Provide openings for splicing; Connect and change direction of conduit runs; Allow connections for branch runs; Permit access to conductors for maintenance; Smooth, rounded integral bushings in hubs protect conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity; High tensile strength and ductility, high corrosion resistance, high impact and shock resistance; Sizes with flat-back design ideal where fitting is mounted flat against surface; Wiring capacity: 12.5 CU-IN as per NEC 314.16(A) |
| Smooth, rounded integral bushing in hubs protects conductor insulation |
| Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity |
| Form 35™ malleable iron UNILETS™ high tensile strength and ductility |
| High corrosion resistance, high impact and shock resistance |
| Sizes with flat back design ideal where fitting is mounted flat against surface |
| 1/2 to 3 in blank covers are domed for extra wiring space |
| Raintight when a cover and gasket are installed |
| Malleable iron cover, stainless steel cover screws, neoprene or composition fiber gasket |
| For use with rigid steel, rigid aluminum and IMC conduit |
| (3) no 4 AWG maximum wire file |
| Triple coated (zinc electroplate/chromate/epoxy powder) finish |
| Form 35™ malleable iron unilets high tensile strength and ductility, high corrosion-resistance, high impact and shock resistance |
| Exclusive built-in easy-pulling rollers in type C (1-1/4 thru 4 in) and type LB (1-1/4 thru 4 in), eliminate damage when cable is pulled through hubs |
| Access opening back |
| 90 deg hub location |
| Triple Coat (Zinc Electroplated, Chromate and Epoxy Powder Coated) |
