Appleton® Mercmaster III MLCQ852G4GA1 Enclosed Gasketed Induction Luminaire With Guard, Induction Lamp, 100 to 120 VAC
Explosion Proof Outdoor Lighting
675432
MFG #: MLCQ852G4GA1
Appleton™
3194.88000
/ ea
Light fixtures that work flawlessly and stand up to harsh conditions go unnoticed everyday, which is exactly the point. Appleton luminaires are designed to withstand the harshest conditions and operate across your facility without incident. A century of innovation and testing makes sure of that. From area to task, flood to emergency, we have a light fixture perfectly suited for every task and use in environments that are hazardous, adverse or ordinary. After all, our vast collection of fixtures is unsurpassed in the industry. Appleton has expanded the boundaries of technology, efficiency and performance to ensure your lights stays on, because failure is not an option.
- Catalog URL - Appleton_MLAQ852G4NA1_Catalog.pdf(Catalog URL)
- http://www.appletonelec.com(Safety Data Sheet URL)
- https://www.appleton.emerson.com/(Seller Home Page URL)
- Seller Home Page URL - appleton(Seller Home Page URL)
- Spec Sheet URL - 11043_SPE_781381119221_Spec.pdf(Spec Sheet URL)
- Spec Sheet URL - SPE_781381119221_Spec.pdf(Spec Sheet URL)
- Tech Drawing URL - appleton-grp-terms-and-conditions.pdf(Tech Drawing URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
For Use In Areas Where Access For Relamping Is Difficult, Reliability Is Essential And The Environment Is Costly To maintain, Cold Environment Applications, Marine And Wet locations, And In A Wide Range Of Industrial, Chemical Processing And Other Areas Where Flammable Gases And Vapors Or Combustible Dusts Are Present Under Conditions Defined By NEC Class I, Division 2, In Non-Hazardous Areas Where Severe Weather Conditions, Excessive Moisture, Dirt, Dust And Corrosive Atmospheres Are A Problem |
The Mercmaster III series provides a instant start and restrike; High lumen output and efficiency (up to 73 lumens per watt); Fixtures operate safely in a 104 DEG F/40 DEG C ambient; Good lumen maintenance provides less than 30 PCT depreciation after 60000 HR of operation; Virtually maintenance free; Ultra-long 100000 HR of life keeps maintenance costs to a minimum; Starts in temperatures as low as -40 DEG F/-40 DEG C; Low total harmonic distortion (less than 10 PCT); No cycling at end of life; Modular design allows scores of fixture component combinations to meet installation and lighting needs; Mounting hoods include cone-shaped pendant, standard pendant, flexible pendant, ceiling and wall (tapped for 3/4 IN or 1 IN NTP); For high corrosion resistance, fixture housing, mounting hoods and guards are copperfree (4/10 of 1 PCT maximum) cast aluminum with baked epoxy finish, electrostatically applied for uniformity; Body gaskets and globe gaskets are high-temperature silicone rubber; |
Instant start and restrike |
High lumen output and efficacy (up to 73 lumens per watt) |
Fixtures operate safely in a 40 deg C (104 deg F) ambient temperatures |
Good lumens maintenance provides less than 30% depreciation after 60K hours of operation |
Virtually maintenance free |
Ultra long 100000 hours of life keeps maintenance costs to a minimum |
Starts in temperatures as low as -40 deg C (-40 deg F) |
Low total harmonic distortion (less than 10%) |
No cycling at end of life |
Modular design allows scores of fixture component combinations to meet installation and lighting needs |
Cone hood fixtures for pendant mounting shed dust, dirt and combustible fibers, and provide an increased surface area for effective heat dissipation |
Reflector choice includes standard dome and 30 deg angle types, both made of fiberglass reinforced white polyester that is highly resistant to unusually corrosive applications |
Reflectors are vented for cooler, dirt free operation and maintained lumen output |
They secure to ballast housing with stainless steel screws threading into stainless steel inserts |
For high corrosion resistance, fixture housing, mounting hoods and guards are copper free (4/10 of 1% max) cast aluminum with baked epoxy finish, electrostatically applied for uniformity |
Hinge has high lip for added safety during installation and servicing |
Hinge and bolt construction ensures 360 deg compression at all points on ballast housing gasket for positive sealing |
Swing away design of captive bolt and nut simplifies servicing |
Body gaskets and globe gaskets are high temperature silicone rubber |
All Mercmaster™ III mounting hoods have provision for easy field installation of fuses in fixtures |