Acme Electric® TP530193S Dry Distribution Transformer, 240/480 VAC Primary, 120/240 VAC Secondary, 37.5 kVA, 60 Hz
Isolation Transformers
321670
MFG #: TP-53019-3S
Acme Electric
2394.24000
/ ea
Acme's low voltage distribution transformers are designed for industrial and commercial applications. All of Acme's general purpose transformers are rated for 600 volts and below. Encapsulated units are offered in ratings up to 15kVA. Ventilated units are available in ratings up to 1000 kVA and meet the requirements of U.S. DOE 10 CFR Part 431 (NEMA TP1) efficiency standards.
- Features
| Ventilatedecore and coil; Extra large wiring compartment for easier installation and cooler case temperatures; NEMA standard bus bar terminals, no special tools needed to make clearly marked connections, tap changing easily accomplished with jumpers; Aluminum windings for increased insulation life, cooler operation, lower losses; Noise and vibration isolating pads standard to assure quiet operation; Large permanently legible nameplates on front; Single phase units can be banked for 3 phase service; All units have ground studs for use with non-metallic conduit; Regulation: 3.65 PCT at 100 PCT PF; No load losses: 145 WTT; Full load load: 821 WTT; Energy efficient; 10-year limited warranty |
| Ground studs for use with non-metallic conduit |
| Quiet operation with sound levels well below NEMA standards |
| Electrostatic shield for enhanced protection |
| Encapsulated core and coil |
| Ventilated core and coil |
| Extra large wiring compartment for easier installation and cooler case temperatures |
| NEMA standard busbar terminals, no special tools needed to make clearly marked connections, tap changing easily accomplished with jumpers |
| Aluminum windings for increased insulation life, cooler operation, lower losses |
| Noise and vibration isolating pads standard to assure quiet operation |
| Large permanently legible nameplates on front |
| Single phase units can be banked for 3 phase service |
| All units have ground studs for use with non-metallic conduit |
| 3.65% at 100% pF regulation |
| 145 WTT no load losses |
| 821 W full load |
| Energy efficient |
| Air cooled/dry cooling |
| Four windings |
| Aluminum, two primary winding, two winding secondary |