Appleton® EFS2752023GFI U-Line® Pin and Sleeve Receptacle Assembly, 125 VAC, 20 A
Explosion Proof Pin & Sleeve Receptacles
107020
MFG #: EFS2752023GFI
Appleton™
1937.53000
/ ea
- ARRA Compliant: C
- Buy American Compliant: N
- Catalog Number: EFS2752023GFI
- Country of Origin: MX
- Currency: USD
- EU RoHS Indicator: C
- Gross Weight Per Pack: 8.2500 lb
- Gross Weight per Pack Metric: 3.74
- Gross Weight UOM Metric: kg
- Height: 6.70 in
- Height [Metric]: 17.0180 cm
- Length: 8.70 in
- Length [Metric]: 22.0980 cm
- Material: Malleable Iron
- Mounting: Surface Mount With 3/4 IN Dead-End Hub
- NEMA Rating: NEMA 3/3R/7BCD/9EFG
- Standard: Class I, Groups C and D, Class II, Groups F and G, and Class III; UL Listed: E81751; UL Standard: 943, 1203
- Standards: ARRA CompliantRoHS CompliantClass I, Groups C and D, Class II, Groups F and G and Class IIIUL File No. E81751UL 943UL 1203
- Sub Brand: U-Line
- Type: 2-Gang Dead End Dust-Ignitionproof
- UNSPSC: 39121406
- UPC 11: 78138167221
- UPC 12: 781381672214
- Width: 7.20 in
- Width [Metric]: 18.2880 cm
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Amperage Rating: 20 A
- Voltage Rating: 125 VAC
U-Line® plugs and receptacles allow the use of electrical equipment in hazardous locations. In non-hazardous locations, the U-Line ECP plug fits into standard NEMA 5-20R and 6-20R receptacles. In hazardous locations, the same U-Line plug is the key to energizing the explosionproof U-Line receptacle. Although U-Line plugs can be used with ordinary receptacles, U-Line receptacles are designed so that they cant be energized by an ordinary plug - ensuring that only safe connections can be made in a hazardous location. Its an convenient, time- and money-saving solution for handheld tools, lighting and other equipment that might be used in both ordinary and hazardous locations. When using a U-Line plug in an explosionproof U-Line receptacle, a twist of the plug makes electrical contact and locks the plug in place with an audible click. The neoprene gasket in the throat of the receptacle seals against the plug or the spring-loaded cover to seal out water, dust and corrosive compounds.
- Brochure URL - 11043_BRO_781381278553_Broc.pdf(Brochure URL)
- Brochure URL - BRO_781381278553_Broc.pdf(Brochure URL)
- http://www.appletonelec.com(Seller Home Page URL)
- Install Instructions URL - Appleton_EFS110_2023_Installation_Instructions.pdf(Install Instructions URL)
- https://www.appleton.emerson.com/(Seller Home Page URL)
- Catalog URL - IDW_DOCUMENT_dcb805f87cbf43ff740f33adb9ab4607918e378ce248971cae00e5d36969185e.pdf(Catalog URL)
- Spec Sheet 1 URL - Appleton_EFS2502023GFI_Datasheet.pdf(Spec Sheet 1 URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Spec Sheet URL - SPE_781381671170_Spec.pdf(Spec Sheet URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Spec Sheet URL - 11043_SPE_781381671170_Spec.pdf(Spec Sheet URL)
- Seller Home Page URL - appleton(Seller Home Page URL)
- Features
Explosionproof, dust-ignitionproof; EFSR-GFI cover installed on two-gang EFD box together with U-Line factory sealed receptacle; Glass-filled reinforced polyester insulating blocks |
Explosion proof, dust-ignition proof |
Factory sealed construction; no external seals are required. Arcing is confi ned within the devices interior sealed chambe |
EFSR-GFI cover installed on two-gang EFD box together with U-Line factory sealed receptacle |
Glass-filled reinforced polyester insulating blocks |
Smooth-operating test and reset buttons |
Can be installed in standard EFD Series mounting boxes |
Provides required ground fault protection for portable electrically-operated devices. Meets all UL and CSA requirements for ground fault protection in hazardous locations |
Well suited for use in highly corrosive atmospheres and wet locations |
Surface mount |
3/4 in dead-end hub |
2-gang |
Baked gray epoxy clad |
With mounting box |