Appleton® Contender™ ENR11201 Pin and Sleeve Receptacle Assembly, 125 VAC, 20 A, 3 Poles, 2 Wires
Explosion Proof Pin & Sleeve Receptacles
85204
MFG #: ENR11201
Appleton™
594.00000
/ ea
- Application: For ECP Mating Plugs
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: ENR11201
- Country of Origin: MX
- Currency: USD
- Dimensions: 6.06 in H x 3.5 in W x 6.19 in D
- EU RoHS Indicator: N
- Gross Weight Per Pack: 1 lb
- Material: Malleable Iron
- Mounting: Surface Mount With 1/2 IN Dead-End Hub
- NEMA Rating: NEMA 3RX
- Number Of Poles: 3
- Standard: Class I, Groups C, D; Class I, Division 2, Group B; Class I, Zone 1, Group IIB; Class I, Zone 2, Group IIB + H2; Class II, Groups F, G; Class III; UL Listed: E10784; UL 1203, UL 1010, UL 894
- Standards: Class I, Groups C, D, Class I, Div 2, Group B, Class I, Zone 1, Group IIB, Class I, Zone 2, Group IIB + H2, Class II, Groups F, G, Class IIIUL File No. E10784UL 1203/1010/894
- Sub Brand: Contender
- Type: 1-Gang Dead End Dust-Ignitionproof
- UNSPSC: 39121406
- UPC 11: 78138181535
- UPC 12: 781381815352
- Stock Status: NONSTOCK
- Brand: Appleton™
- Manufacturer: Appleton
- Amperage Rating: 20 A
- Number of Wires: 2
- Voltage Rating: 125 VAC
U-Line® Contender® plugs and receptacles offer all the advantages of U-Line technology without the need to replace competitors back boxes that have already been installed. Simply change out the receptacle and your company can benefit from the safety, flexibility and value of U-Line. Appleton provides its own compatible back boxes, so you can continue to expand your facility using a single vendor. U-Line Contender plugs and receptacles allow the use of electrical equipment in hazardous locations. In non-hazardous locations, the U-Line ECP plug fits into standard NEMA 5-20R and 6-20R receptacles. In hazardous locations, the same U-Line plug is the key to energizing the explosionproof U-Line receptacle. A twist of the plug makes electrical contact and locks the plug in place with an audible click. The neoprene gasket in the throat of the receptacle seals against the plug or the spring-loaded cover to seal out water, dust and corrosive compounds. Although U-Line plugs can be used with ordinary receptacles, U-Line receptacles are designed so that they cant be energized by an ordinary plug-ensuring that only safe connections can be made in a hazardous location.
- http://www.appletonelec.com(Seller Home Page URL)
- https://www.appleton.emerson.com/(Seller Home Page URL)
- Spec Sheet URL - 11043_SPE_781381815352_Spec.pdf(Spec Sheet URL)
- Spec Sheet 1 URL - Appleton_ENR11201_Datasheet.pdf(Spec Sheet 1 URL)
- Warranty URL - 11043_AFRVNTEYP0B9JHS4.pdf(Warranty URL)
- Install Instructions URL - Appleton_ENR11201_Data_Sheet_1.pdf(Install Instructions URL)
- Warranty URL - appleton-grp-terms-and-conditions.pdf(Warranty URL)
- Applications
- Features
For ECP Mating Plugs |
Explosionproof, dust-ignitionproof; Covers are UL Listed when used with Contender series back boxes; Insulators provide superior dielectric and mechanical strength and lowest arc tracking; Fiberglass reinforced thermoset polyester insulating blocks; Dead front design: receptacle is not energized until plug is fully inserted and switch is engaged; ECP plug fits U-Line explosionproof receptacles; U-Line Contender receptacles only available for use in combination with 1- and 2-gang EDS boxes incorporating such devices as pilot lights, switches and push buttons; For lighting systems, conveyors, heaters, motor-generator sets, air conditioners, compressors, pumps |
Explosion proof, dust-ignition proof |
Covers are UL Listed when used with Contender series back boxes |
Insulators provide superior dielectric and mechanical strength and lowest arc tracking |
Dead front design: receptacle is not energized until plug is fully inserted and switch is engaged |
ECP plug fits U-Line explosion proof receptacles |
U-Line Contender receptacles only available for use in combination with 1- and 2-gang EDS boxes incorporating such devices as pilot lights, switches and push buttons |
Fiberglass reinforced thermoset polyester insulating blocks |
Surface mount |
1/2 in dead-end hub |
1-gang |
For lighting systems, conveyors, heaters, motor-generator sets, air conditioners, compressors, pumps |
Copper free (4/10 of 1 pct) aluminum cover |
Epoxy powder coat cover and triple-coat (zinc electroplate, chromate and epoxy powder coat) mounting box |
With mounting box |