Decora® LevNet RF™ WSS20-G9N Rocker Switch Receiver With Color Change Kit, 902 MHz, <0.5 W

Electrical Switches
861197 MFG #: WSS20-G9N
Leviton®
66.29000 / ea
10962_7YM2TVG049P3FWZ8
  • Application: Residential
  • ARRA Compliant: C
  • Buy American Compliant: C
  • Catalog Number: WSS20-G9N
  • Color: Ivory/Light Almond/White
  • Country of Origin: MX
  • Currency: USD
  • Dimensions: 1.66 in W x 1.34 in D
  • Environmental Conditions: 0 to 95% Non Condensing Humidity, 32 to 104 deg F Storage
  • EU RoHS Indicator: C
  • Gross Weight Per Pack: 0.4000 lb
  • Gross Weight per Pack Metric: 0.18
  • Gross Weight UOM Metric: kg
  • Height: 2.38 in
  • Height [Metric]: 6.0325 cm
  • Length: 5.00 in
  • Length [Metric]: 12.7000 cm
  • Mounting: Wall
  • Replaced Catalog Number: DL05S-D0Z
  • Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantASHRAE 90.1CAN/CSA C22.2 File No. 14ETL/cETL Listed to UL508FCC Approved
  • Sub Brand: LevNet
  • Type: Receiver Switch
  • UNSPSC: 52161523
  • UPC 11: 07847767179
  • UPC 12: 078477671795
  • Width: 2.81 in
  • Width [Metric]: 7.1450 cm
  • Stock Status: NONSTOCK
  • Brand: Leviton®
  • Manufacturer: Leviton Manufacturing Co., Inc.
  • Frequency Rating: 902 MHz
  • Power Rating: <0.5 W
QTY
Add to Wishlist
  • Applications
  • Features
Residential
Repeater Disabled
Decora® design aesthetics, intuitive rocker switch with return to center design
No new wiring required, the LevNet RF™ wall switch receivers simply replaces the existing light switch and communicates with self-powered switches and sensors via radio 902 MHz frequency
Vacancy switching, provides pushbutton manual-on/off light switching of each light load at any time
Maximize energy savings, when paired with LevNet RF™ PIR occupancy Sensor, the LevNet RF™ wall switch receivers contain all sensor settings
Manual on/auto on, auto on/auto off, walk-through timer, auto time out selections of 2 min for testing (10, 20 or 30 min)
Presentation/viewing mode, turn lights Off and keep them Off while room is occupied (i.e. for slide or film presentations), automatically returns to normal when manually switched back On or room becomes vacant and time delay expires
Walk-through feature, maximizes energy savings by assuring a 2.5 min time out if motion is not present after 2.5 min in auto-on mode
Standard size for seamless installation, LevNet RF™ wall switch receivers fit in a standard single-gang wallbox
Required wiring, neutral and non-neutral models available, non-neutral requires 25 W minimum load
Zero cross relay switches at the zero crossing point of the AC power curve to ensure maximum contractor life and compatibility with electronic ballasts
Energy savings and efficiency, lowest power consumption of any RF device less than 1/2 W per 120 VAC device and less than 2/3 W per 277 VAC device annually approximately 70% savings over other RF devices
Air gap switch, assures A/C power disconnects for safety on no neutral switch
Color change kits, white, ivory and light almond included for design flexibility, ease of ordering, inventory and cost control
10 A load rating for commercial lighting circuits
EnOcean® technology enabled, for LevNet RF™ communication from self-powered lighting controls
HIS (high inrush stability), arcing design for use with all commercial ballasts
Retrofit energy saving bi-level lighting with occupancy sensor control, replace two light switches with LevNet RF™ wall switch receivers pair both with self-powered RF PIR sensor, set the first LevNet RF™ wall switch to auto-on/auto-off and the second to manual-on/auto-off
Product compatibility, LevNet RF™ 902 MHz products
Repeater disabled