SolaHD DT661H11S Ventilated Drive Isolation Transformer, 460 VAC Delta Primary, 230Y/133 VAC Secondary, 11 kVA, 60 Hz
Drive Isolation Transformers
183506
MFG #: DT661H11S
SolaHD™
1370.27000
/ ea
- ARRA Compliant: Y
- Buy American Compliant: Y
- Catalog Number: DT661H11S
- Country of Origin: US
- Currency: USD
- Dimensions: 23 in H x 18 in W x 14 in D
- Enclosure Type: NEMA 3R
- EU RoHS Indicator: Y
- Gross Weight Per Pack: 172.0000 lb
- Gross Weight per Pack Metric: 78.02
- Gross Weight UOM Metric: kg
- Height: 29.00 in
- Height [Metric]: 73.6600 cm
- Length: 20.00 in
- Length [Metric]: 50.8000 cm
- Mounting Type: Floor
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL 506UL 1561UL File No. E25872cULus File No. E77014CSA C22.2 No. 66
- Type: Ventilated
- UNSPSC: 39121029
- UPC 11: 78347254275
- UPC 12: 783472542758
- Width: 21.00 in
- Width [Metric]: 53.3400 cm
- Stock Status: NONSTOCK
- Brand: SolaHD™
- Manufacturer: Emerson
- Frequency Rating: 60 Hz
- Phase: 3 pH
- Power Rating: 11 kVA
- Primary Voltage: 460 VAC
- Secondary Voltage: 133/230 VAC
SolaHD Drive Isolation Transformer, Ventilated, 460 VAC Delta Primary, 230Y/133 VAC Secondary, 11 kVA, 60 Hz, 3 Phase, 1, 5% FCAN/1, 5% FCBN Taps, Floor Mount, NEMA 3R, 23 in H x 18 in W x 14 in D
- Seller Home Page URL - solahd(Seller Home Page URL)
- Seller Home Page URL - solahd.aspx(Seller Home Page URL)
- Spec Sheet URL - 11375_Drive-Isolation-Xformer.pdf(Spec Sheet URL)
- Spec Sheet URL - catalog-solahd-drive-isolation-transformers-en-us-163704.pdf(Spec Sheet URL)
- Spec Sheet URL - Drive-Isolation-Xformer.pdf(Spec Sheet URL)
- Features
| Taps on all units for adjustments to incoming source voltage |
| Full capacity secondary neutral as required by the National Electric Code |
| Shielding attenuates line to ground noise |
| Isolation minimizes load disturbances caused by the SCR drive |
| A transformer is needed to magnetically isolate the incoming line from the motor drive |
| The transformer must also provide a voltage change to match the required voltage of the SCR drive |
| Standard designs are delta primary and wye secondary to match the common power sources required in most three phase rectifier circuits |
| Designed to handle the mechanical stresses, voltage demands and harmonics associated with SCR applications |
| Designed to handle the mechanical stresses, voltage demands and harmonics associated with SCR applications |