Bodine 2210 Pacesetter 30R-D Parallel Shaft AC Inverter Duty Gearmotor 30R2BEPP-D4 /180:1/
Inline Parallel Shaft Gearmotors
PDW~12449654
MFG #: 2210
Bodine Electric Company
377.71000
/ ea
- Application: Face mounting is standard.We offer most standard models with either 230 VAC, 60Hz, 3-phase, or 230/460 VAC, 60 Hz, 3-phase winding options.
- Catalog Number: 2210
- Enclosure Type: TENV (Totally Enclosed Non-Ventilated)
- Frequency Rating: 60
- Full Load Current: 0.38 A
- Harmonization Code: 8501.10.6020
- Insulation Class: F
- IP Rating: IP20
- Motor Power: AC
- Mounting Type: Face
- NEMA Frame Size: 30R
- Optional Accessories: Die cast terminal box kit model 5982."L" bracket kit model 5968 permits base, ceiling, and sidewall mounting.
- Phase: 3 pH
- Shaft Type: Parallel
- Stage: 4
- Standard: CSA;CURUS;ROHS;UL
- Supply Voltage: 230 V
- Stock Status: NONSTOCK
- Brand: Bodine Electric Company
- Manufacturer: Bodine Electric Company
- Gear Ratio: 180:1
- Horsepower: 1/25
BODINE 2210 30R2BEPP-D4 /180:1/ inverter duty
- Applications
- Features
| Face mounting is standard.We offer most standard models with either 230 VAC, 60Hz, 3-phase, or 230/460 VAC, 60 Hz, 3-phase winding options. |
| -Quintsulation™5-stage insulation system designed to meet NEMA MG 1-1993, Section IV, Part 31--Variable speed, 3-phase design for operation with a wide range of inverter (AC drive) products--Inverter-Grade magnet wire and Class "F" insulation system for increased protection against spikes and corona damage caused by the inverter--UL recognized for construction, CSA certified, and in compliance with the Low Voltage Directive "CE"--Totally Enclosed, non-ventilated IP-20 rating. IP-44 with optional t-box kit installed--Class "F" insulation system--Aluminum endshields for high thermal efficiency and light weight--Unvented gearhousing for universal horizontal mounting--Industrial lip type seals on motor and output shafts--Needle bearings on output shaft for increased radial load capacity and long life--Permanently lubricated--Helical pinion accurately cut on motor shaft for maximum strength and minimum noise |