Sandvik Coromant 6259478 CoroMill® Plura Chamfer End Mill, 0.059 in, 0.167 in Max Depth of Cut, 4 Flutes, 0.393 in Shank
Corner Radius & Corner Chamfer End Mills
751461
MFG #: 6259478
Sandvik Coromant
150.47000
/ ea
- Alternate Catalog Number: 1C050-0150-045-XB 1620
- ANSI Code: 1C050-0150-045-XB 1620
- Catalog Number: 6259478
- Country of Origin: IT
- Cutting Direction: Right Hand
- Flute Type: Straight
- Gross Weight Per Pack: 0.2600 lb
- ISO Code: 1C050-0150-045-XB 1620
- Item Group: 732
- Material: Solid Carbide
- Maximum Depth of Cut: 4.25 mm
- Series: CoroMill® Plura
- Shank Type: Weldon Flat
- Standards: DIN1835 B|DIN6535 HB
- UPC 11: 69826268904
- UPC 12: 69826268904
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Cutter Diameter: 1.5 mm
- Finish: PVD-TiAlN Coated
- Number of Flutes: 4
- Overall Length: 99.2 mm
- Shank Diameter: 10 mm
Sandvik Coromant Chamfer End Mill, Series: CoroMill® Plura, 0.059 in Cutter Dia, 3.905 in Overall Length, 0.167 in Maximum Depth of Cut, 4 Flutes, 0.393 in Shank Dia, Right Hand Cutting, 0 deg Helix Angle, Weldon Flat Shank, ANSI Code: 1C050-0150-045-XB 1620, ISO Code: 1C050-0150-045-XB 1620, Solid Carbide, PVD Coated
- Features
1620 manufacturer grade |
8.4 mm H shank |
4 face effective cutt edge |
45 deg cutting edge |
Straight chip breaker |
5 mm Dia core at face |
Without coolant entry |
No coolant exit |
10 mm Dia maximum cutting |
SFW feed direction |
Neutral helix flute hand |
1 deg radial rake |
0 deg axial rake |
4.25 mm L usable |
3 maximum regrinds |
59.2 mm overhang |
80000 r/min |
20 life cycle state |
Tools for 45 deg and 60 deg chamfers and convex workpiece radius chamfers |
H6 connection diameter tolerance |