SGS® 32606 V-Carb™ 55CR Corner Radius Medium Length Single End High Performance End Mill, 1/8 in, 1/4 in Max Depth of Cut, 5 Flutes, 1/8 in Shank, 1-1/2 in OAL
Corner Radius & Corner Chamfer End Mills
535159
MFG #: 32606
SGS
19.91000
/ ea
- Catalog Number: 32606
- Country of Origin: UKN
- Cutting Direction: Right Hand
- Flute Type: Right Spiral
- Gross Weight Per Pack: 0.0100 lb
- Helix Angle: 45 °
- Material: Solid Carbide
- Series: V-Carb™ 55CR
- Shank Length: 1-1/4 in
- Shank Type: Straight
- Standards: ISO 9001, 9002
- Type: Center Cutting High Performance Positive Rake Single End
- UNSPSC: 23242511
- UPC 11: 69178132606
- UPC 12: 69178132606
- Stock Status: NORMALLY STOCKED
- Brand: SGS
- Manufacturer: KYOCERA SGS Precision Tools
- Corner Radius: 0.01 in
- Cutter Diameter: 1/8 in
- Finish: AlTiN Coated
- Length of Cut: 1/4 in
- Number of Flutes: 5
- Overall Length: 1-1/2 in
- Shank Diameter: 1/8 in
The V-Carb end mill is the finishing touch that you can expect more from. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. Tackle a range of applications with this tool.
- Features
High performance finishing and semi-finishing 5 flute variable geometry end mill; 45 DEG right spiral helix angle; Positive rack angle; External coolant recommanded; Variable pitch combined with an odd number of flutes suppresses chatter and produces better surface finishes; Rigid construction minimizes deflection and increases part accuracy; Optimized tool geometry allows for improved shearing and decreased loads |
Variable pitch combined with an odd number of flutes suppresses chatter and produces better surface finishes |
Rigid construction minimizes deflection and increases part accuracy |
Optimized tool geometry allows for improved shearing and decreased loads |
Can be run at higher production rates |
Tool holders with adequate gripping pressure are required |
Stub length solid holders are recommended for heavy stock removal |
Avoid remilling chips |
Set-up rigidity critical during heavy roughing |
Regrind and recondition services are available from SGS tool company |
External coolant |
Positive rake angle |
Unequal flute spacing |
Solid carbide provides better rigidity than high speed steel |
It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials |
Applicable materials: steels, stainless steels, cast iron, high temp alloys and titanium |