Valenite Tiger-tec® Silver 6955671 Positive Single Sided Turning Insert, VCGT3(3)0.5-FN2 WNN10 ANSI, Rhombic, Carbide
VCGT Turning Inserts
PDW~12584986
MFG #: VCGT3(3)0.5-FN2WNN10
Walter (Valentine)
27.20000
/ ea
- ANSI Code: VCGT3(3)0.5-FN2 WNN10
- Catalog Number: VCGT3(3)0.5-FN2WNN10
- Corner Radius: 0.2 mm
- Finish: PVD-TiAlN (HIPIMS) Coated
- Gross Weight Per Pack: 0.0100 lb
- Hole Diameter: 4.4 mm
- Included Angle: 35 °
- ISO Code: VCGT160402-FN2 WNN10
- Relief Angle: 7 °
- Series: Tiger-tec® Silver
- Sub Brand: Tiger-tec®
- Thickness: 4.76 mm
- Stock Status: NONSTOCK
- Brand: Walter (Valentine)
- Manufacturer: Walter
- Chipbreaker: FN2
- Cutting Direction: Neutral
- For Use On: Aluminum and other Non-Ferrous Metals
- Inscribed Circle: 9.525 mm
- Insert Size: 3(3)0.5
- Insert Style: VCGT
- Manufacturer's Grade: WNN10
- Material: Carbide
- Material Grade: N
- Maximum Depth of Cut: 2 mm
- Rake: Positive
- Seat Size: 16
- Shape: Rhombic
VALENITE Tiger-tec® Silver Turning Insert, Positive Single Sided, VCGT Insert, Rhombic, 2 mm Maximum Depth of Cut, 9.525 mm Inscribed Circle, 4.76 mm Thickness, FN2 Chipbreaker, 0.2 mm Corner Radius, Manufacturer's Grade: WNN10, ANSI Code: VCGT3(3)0.5-FN2 WNN10, ISO Code: VCGT160402-FN2 WNN10, 35 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, Coated
- Features
Longer tool life - excellent wear and fracture resistance |
Prevents layer peeling - strong intra coating adhesion |
Higher adhesion between each layer with improved crystal structure |
Control chipping - higher layer strength |
XP chipbreaker - wide chip control range and sharp cutting performance |
Suitable for low carbon steel and sticky material |
CA510 grade special substrate with thermal deformation resistance along with a thick and tough film coating for wear resistance |
High speed and high efficiency steel machining |
+/-0.025 mm corner point tolerance |
+/-0.13 mm thickness tolerance |
+/-0.025 mm inscribed circle tolerance |
0.05 to 0.12 mm feed/rev |
16.6 mm cutting edge length |
5 deg rake |