Valenite Tiger-tec® Silver 6955669 Positive Single Sided Turning Insert, VCGT2(2)0.5-FN2 WNN10 ANSI, Rhombic, Carbide
VCGT Turning Inserts
PDW~12584977
MFG #: VCGT2(2)0.5-FN2WNN10
Walter (Valentine)
24.50000
/ ea
- ANSI Code: VCGT2(2)0.5-FN2 WNN10
- Catalog Number: VCGT2(2)0.5-FN2WNN10
- Corner Radius: 0.2 mm
- Finish: PVD-TiAlN (HIPIMS) Coated
- Gross Weight Per Pack: 1 lb
- Hole Diameter: 2.8 mm
- Included Angle: 35 °
- ISO Code: VCGT110302-FN2 WNN10
- Relief Angle: 7 °
- Series: Tiger-tec® Silver
- Sub Brand: Tiger-tec®
- Thickness: 3.18 mm
- Stock Status: NONSTOCK
- Brand: Walter (Valentine)
- Manufacturer: Walter
- Chipbreaker: FN2
- Cutting Direction: Neutral
- For Use On: Aluminum and other Non-Ferrous Metals
- Inscribed Circle: 6.35 mm
- Insert Size: 2(2)0.5
- Insert Style: VCGT
- Manufacturer's Grade: WNN10
- Material: Carbide
- Material Grade: N
- Maximum Depth of Cut: 2 mm
- Rake: Positive
- Seat Size: 11
- Shape: Rhombic
VALENITE Tiger-tec® Silver Turning Insert, Positive Single Sided, VCGT Insert, Rhombic, 2 mm Maximum Depth of Cut, 6.35 mm Inscribed Circle, 3.18 mm Thickness, FN2 Chipbreaker, 0.2 mm Corner Radius, Manufacturer's Grade: WNN10, ANSI Code: VCGT2(2)0.5-FN2 WNN10, ISO Code: VCGT110302-FN2 WNN10, 35 deg Included Angle, 7 deg Relief Angle, Neutral Hand, Carbide, Coated
- Features
PP chipbreaker - 3-step smart dot structure is applicable to a wide range of feed rates in steel finishing |
Smooth taper cutting edge reduces cutting forces |
PV720 grade MEGACOAT nano efficient machining with high quality surface finishes and superior wear and adhesion resistance |
Recommended cermet for stable steel machining and high quality surface finish |
For long, small diameter shafts with a tendency to vibrate |
40 to 60 deg double countersink hole |
WNN10 - For roughing and finishing |
Applicable on ISO N alloys, aluminum alloys, copper alloys and magnesium alloys |
+/-0.025 mm corner point tolerance |
+/-0.13 mm thickness tolerance |
+/-0.025 mm inscribed circle tolerance |
0.05 to 0.12 mm feed/rev |
11.1 mm cutting edge length |
5 deg rake |