Valenite Tiger-tec® Silver 7053917 Double Sided Negative Turning Insert, DNMG442-NRS WSM10S ANSI, Rhombic, DNMG Insert
DNMG Turning Inserts
PDW~12584072
MFG #: DNMG442-NRSWSM10S
Walter (Valentine)
21.60000
/ ea
- ANSI Code: DNMG442-NRS WSM10S
- Catalog Number: DNMG442-NRSWSM10S
- Corner Radius: 0.8 mm
- Finish: PVD-TiCN+Al2O3 Coated
- Gross Weight Per Pack: 0.0200 lb
- Hole Diameter: 0.2 in
- Included Angle: 55 °
- ISO Code: DNMG150608-NRS WSM10S
- Relief Angle: 0 °
- Series: Tiger-tec® Silver
- Sub Brand: Tiger-tec®
- Thickness: 6.35 mm
- Type: 2-Sided
- Stock Status: NONSTOCK
- Brand: Walter (Valentine)
- Manufacturer: Walter
- Chipbreaker: NRS
- Cutting Direction: Neutral
- For Use On: Stainless Steel, High Temperature Alloys and Titanium
- Inscribed Circle: 12.7 mm
- Insert Size: 442
- Insert Style: DNMG
- Manufacturer's Grade: WSM10S
- Material: Carbide
- Material Grade: M, S
- Maximum Depth of Cut: 4 mm
- Rake: Negative
- Seat Size: 15
- Shape: Rhombic
With Tiger-tec® Silver, Walter is offering a world first in coating technology for indexable inserts. The special aluminium oxide layer with optimized microstructure reduces wear during turning, milling and drilling operations and increases toughness and temperature resistance for significantly higher cutting data.
- Features
| Improved coating adhesion prevents chipping and provides stable machining |
| Micro TiCN coating provides excellent wear resistance |
| Hard surface layer - provides advanced wear resistance |
| Strong intra coating adhesion - higher adhesion between each layer with improved crystal structure |
| Micro TiCN layer - higher coating hardness is possible due to a micro TiCN crystal structure, resulting in increased wear resistance |
| CA315 grade excellent performance for machining gray and nodular cast iron by optimizing the total coating layer thickness |
| First choice for continuous to interrupted machining of nodular cast iron |
| +/-0.13 mm thickness tolerance |
| 0.05 to 0.152 mm inscribed circle tolerance |
| 0.13 to 0.32 mm feed/rev |
| 15.5 mm cutting edge length |