Sandvik Coromant 6707333 T-Max® P Negative Basic Shape Turning Insert, CNMG 432-PM 4305, C-80 deg Diamond, CNMG Insert
CNMG Turning Inserts
897568
MFG #: 6707333
Sandvik Coromant
17.17000
/ ea
- Alternate Catalog Number: CNMG 12 04 08-PM 4305
- ANSI Code: CNMG 432-PM 4305
- Catalog Number: 6707333
- Corner Radius: 0.0312 in
- Country of Origin: IN
- Finish: CVD-TiCN+Al2O3+TiN Coated
- Gross Weight Per Pack: 0.2300 lb
- Hole Diameter: 0.2029 in
- Included Angle: 80 °
- ISO Code: CNMG 12 04 08-PM 4305
- Item Group: 112
- Relief Angle: 0 °
- Series: T-Max® P
- Thickness: 0.187 in
- Stock Status: NONSTOCK
- Brand: Sandvik Coromant
- Manufacturer: Sandvik Coromant
- Chipbreaker: PM
- Cutting Direction: Neutral
- For Use On: Cast Iron and Steel
- Inscribed Circle: 1/2 in
- Insert Size: 432
- Insert Style: CNMG
- Manufacturer's Grade: 4305
- Material: Carbide
- Material Grade: K, P
- Maximum Depth of Cut: 0.217 in
- Rake: Negative
- Seat Size: 12
- Shape: Rhombic
Sandvik Coromant Turning Insert, Negative Basic Shape, Series: T-Max® P, CNMG Insert, C-80 deg Diamond, 5.5 mm Maximum Depth of Cut, 1/2 in Inscribed Circle, 0.1874 in Thickness, 0.5077 in Length, PM Chipbreaker, 0.0312 in Corner Radius, 0.2029 in Hole Dia, Manufacturer's Grade: 4305, ANSI Code: CNMG 432-PM 4305, ISO Code: CNMG 12 04 08-PM 4305, 80 deg Included Angle, 0 deg Relief Angle, Neutral Hand, Carbide, MTCVD Coated, Material Grade: K/P
- Features
| T5305 grade fine grained substrate with a low cobalt content |
| Thick layer of MT-CVD coating with a layer of Al2O3 on the surface |
| Special finish for coating |
| Top performance for machining gray cast iron |
| Material with the highest abrasion resistance of the 5300 series |
| Higher cutting speeds |
| Continuous and slightly interrupted cut |
| 20 life cycle state |