Milwaukee® 48-13-7337 Extra Length General Purpose Heavy Duty, 3/8 in Dia x 24 in L, Standard Twist Point, 3/8 in Shank, Bright
Cable Bits
63145
MFG #: 48-13-7337
Milwaukee®
27.35000
/ ea
- Alternate Catalog Number: 48137337
- Applicable Materials: Aluminum, Ferrous, Non-Ferrous Metal, Plastic and Wood
- Application: For installers of all types of small wire systems - computer, security, phone, cable, etc.
- ARRA Compliant: C
- Bit Diameter: 3/8 IN in
- Buy American Compliant: C
- Catalog Number: 48-13-7337
- Country of Origin: CN
- Currency: USD
- Cutting Direction: Right Hand
- Cutting Edge Material: HSS
- Drilling Depth: 20.0 in
- EU RoHS Indicator: C
- Gross Volume Per Pack: 0.80
- Gross Weight Per Pack: 0.6100 lb
- Gross Weight per Pack Metric: 0.36
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8207504030
- Height: 1.25 in
- Height [Metric]: 3.1750 cm
- Length: 24.25 in
- Length [Metric]: 61.5950 cm
- Material: HSS
- Shank Type: 3-Flat/Round
- Standards: ARRA CompliantBuy American Act Compliant
- Sub Brand: MILWAUKEE
- Type: Extra Length General Purpose Heavy Duty
- UNSPSC: 20121613
- UPC 11: 04524209360
- UPC 12: 045242093601
- Warranty Description: None
- Width: 1.25 in
- Width [Metric]: 3.1750 cm
- Stock Status: NONSTOCK
- Brand: Milwaukee®
- Manufacturer: Milwaukee Tool
- Diameter: 3/8 in
- Finish: Coated Flute
- Overall Length: 24.0 in
- Point Type: Standard Twist
- Shank Size: 3/8 in
- Applications
- Features
| For installers of all types of small wire systems - computer, security, phone, cable, etc. |
| Aggressive Tip Geometry Provides Faster Cutting; Coated Flutes For Fast Chip Removal; Wire Pulling Hole Enables Wire To Be Attached To The Bit And Pulled Through Holes When Needed; 3-Flat Shank Stops Bit From Slipping In The Drill'S Chuck, 3/8 IN Bellhanger Bit Comes In 12 IN, 18 IN, And 24 IN Lengths |
| Extra length for extra reach |
| Pull the wire back through the hole by simply attaching a line or the wire to the bit |
| Reduced slipping - 3-flat Secure Grip™ shank holds the bit firmly in the chuck |
| Wire pulling hole enables wire to be attached to the bit and pulled through holes when needed |
| A small hole at the tip of the bit enables wire to be attached to the accessory and pulled through holes when installing wiring systems |
| Cw spiral angle |
| 2 flutes |
| Round shanks with flats are ground flat on three sides for increased chuck grip, reducing slippage and help centering the drill in the chuck |
| They are used with portable drills and drill presses on ferrous and non-ferrous materials |
| High speed steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and non-ferrous materials |
| Bright provides a smooth, polished finish on the tool |
| It increases chip flow in softer materials such as aluminum, wood and plastic |