Milwaukee® 48-13-7225 Extra Length General Purpose Heavy Duty, 1/4 in Dia x 18 in L, Standard Twist Point, 1/4 in Shank, Bright
Cable Bits
63142
MFG #: 48-13-7225
Milwaukee®
17.76000
/ ea
- Alternate Catalog Number: 48137225
- Applicable Materials: Aluminum, Ferrous, Non-Ferrous Metal, Plastic and Wood
- Application: For installers of all types of small wire systems - computer, security, phone, cable, etc.
- ARRA Compliant: C
- Bit Diameter: 1/4 IN in
- Buy American Compliant: C
- Catalog Number: 48-13-7225
- Country of Origin: CN
- Currency: USD
- Cutting Direction: Right Hand
- Cutting Edge Material: HSS
- Drilling Depth: 14.0 in
- EU RoHS Indicator: C
- Gross Weight Per Pack: 0.5100 lb
- Gross Weight per Pack Metric: 0.18
- Gross Weight UOM Metric: kg
- Harmonization Tariff Schedule Code: 8207504030
- Height: 1.20 in
- Height [Metric]: 3.0480 cm
- Length: 19.45 in
- Length [Metric]: 49.4030 cm
- Material: HSS
- Shank Type: 3-Flat/Round
- Standards: ARRA CompliantBuy American Act Compliant
- Sub Brand: MILWAUKEE
- Type: Extra Length General Purpose Heavy Duty
- UNSPSC: 20121613
- UPC 11: 04524209335
- UPC 12: 04524209335
- Warranty Description: None
- Width: 1.25 in
- Width [Metric]: 3.1750 cm
- Stock Status: NORMALLY STOCKED
- Brand: Milwaukee®
- Manufacturer: Milwaukee Tool
- Diameter: 1/4 in
- Finish: Coated Flute
- Overall Length: 18.0 in
- Point Type: Standard Twist
- Shank Size: 1/4 in
- Applications
- Features
| For installers of all types of small wire systems - computer, security, phone, cable, etc. |
| Aggressive Tip Geometry Provides Faster Cutting; Coated Flutes For Fast Chip Removal; Wire Pulling Hole Enables Wire To Be Attached To The Bit And Pulled Through Holes When Needed; 3-Flat Shank Stops Bit From Slipping In The Drill'S Chuck; 1/4 IN Bellhanger Bit Comes In 12 IN, 18 IN And 24 IN Lengths |
| Extra length for extra reach |
| Pull the wire back through the hole by simply attaching a line or the wire to the bit |
| Reduced slipping - 3-flat Secure Grip™ shank holds the bit firmly in the chuck |
| Wire pulling hole enables wire to be attached to the bit and pulled through holes when needed |
| A small hole at the tip of the bit enables wire to be attached to the accessory and pulled through holes when installing wiring systems |
| Cw spiral angle |
| 2 flutes |
| Round shanks with flats are ground flat on three sides for increased chuck grip, reducing slippage and help centering the drill in the chuck |
| They are used with portable drills and drill presses on ferrous and non-ferrous materials |
| High speed steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and non-ferrous materials |
| Bright provides a smooth, polished finish on the tool |
| It increases chip flow in softer materials such as aluminum, wood and plastic |