All-Pro Emergency APCH7G Universal Emergency Exit Lamp With LED Heads Combo, LED Lamp, 120/277 VAC, EXIT Legend

Exit & Emergency
757210 MFG #: APCH7G
Sure-Lites®
73.05000 / ea
  • Amperage Rating: 0.09 A
  • Application: Lighting
  • ARRA Compliant: C
  • Battery: Nickel Cadmium
  • Battery Runtime: 90 Minutes
  • Buy American Compliant: C
  • Catalog Number: APCH7G
  • Country of Origin: CN
  • Currency: USD
  • Dimensions: 8.5 in L x 13.25 in W x 2.6 in H
  • EU RoHS Indicator: C
  • Fixture Type: Emergency Exit Combination Light
  • Gross Weight Per Pack: 2.8170 lb
  • Gross Weight per Pack Metric: 1.16
  • Gross Weight UOM Metric: kg
  • Harmonization Tariff Schedule Code: 9405616000
  • Height: 2.60 in
  • Height [Metric]: 6.6040 cm
  • Housing Material: Thermoplastic
  • Lamp Wattage: 0.78 W
  • Length: 8.50 in
  • Length [Metric]: 21.5900 cm
  • Light Color: White
  • Lumens: N/A
  • Material: Thermoplastic
  • Mounting: Ceiling/Wall Mount
  • Mounting Type: Ceiling
  • Number of Heads: 2
  • Number Of Lamps: 1
  • Series: APC
  • Size: 8.5 IN Length 13.25 IN Width 2.6 IN Height
  • Standard: UL Listed - Damp Location
  • Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL 924NEC CertifiedNFPA 101ECCN EAR99NLR
  • Sub Brand: APC, APCH Series
  • Type: LED Exit and Emergency
  • UNSPSC: 39111707
  • UPC 11: 08008356718
  • UPC 12: 080083567188
  • Wattage: 1.68 W at 277 V
  • Width: 13.25 in
  • Width [Metric]: 33.6550 cm
  • Stock Status: NORMALLY STOCKED
  • Brand: Sure-Lites®
  • Manufacturer: Cooper Lighting Solutions
  • Fixture Wattage: 0.78/1.68 W
  • Housing Finish: Textured
  • Lamp Type: LED
  • Legend: EXIT
  • Voltage Rating: 120/277 V
QTY
  • Applications
  • Features
Lighting
3.6V, .78W DC long lasting LED heads
Solid-state voltage limited charger
Brownout protection
Low-Voltage disconnect
Overload/short circuit protection
Test switch/power indicator light
3.6 VDC, 0.78 W DC long lasting LED heads
Universal face green letters
Remote capacity model
Sealed Ni-Cd battery
2.8/2.1 W input power
0.2/0.07 power factor
All components are injection molded, color stable, high impact thermoplastic material
Designer white textured finish standard
Components are of snap-fit construction to facilitate under 5 min installation reinforcing ribs throughout to provide maximum strength
Molded-in wireways facilitate internal wire routing and connections
All components including battery and electronics are located inside the exit housing, snap-fit canopy with captive mounting screws included with all exits
10 to 40 deg C operating temperature
All components including battery and electronics are located inside the exit housing. snap-fit canopy with captive mounting screws included with all exits
10 to 40 deg C operating range
High impact thermoplastic housing