Leviton® ODS10-IDE OCCUPANCY SENSOR
Occupancy Sensors
868648
MFG #: ODS10-IDE
Leviton®
58.33000
/ ea
- Application: Commercial
- ARRA Compliant: C
- Buy American Compliant: C
- Catalog Number: ODS10-IDE
- Color: Black
- Control Output: Manual On/Automatic Off
- Country of Origin: CN
- Currency: USD
- Dimensions: 4.06 in H x 1.75 in W x 1.35 in D
- EU RoHS Indicator: C
- Frequency Rating: 60 Hz
- Gross Weight Per Pack: 0.3800 lb
- Gross Weight per Pack Metric: 0.14
- Gross Weight UOM Metric: kg
- Height: 6.0000 in
- Lamp Type: Fluorescent/Incandescent
- Length: 11.7500 in
- Mounting: Wall
- Power Rating: 100/250 mW
- Response Frequency: 60 Hz
- Standard: UL/CUL
- Standards: ARRA CompliantBuy American Act CompliantRoHS CompliantUL/cUL ListedCSA CertifiedNOM CertifiedFCC CertifiedCEC Title 20/24 Compliant
- Sub Brand: Decora
- Supply Voltage: 120/277 V
- Temperature Rating: 32 to 122 °F
- Time Delay: 30 s to 30 min
- Type: Occupancy Sensor
- UNSPSC: 45111808
- UPC 11: 07847737002
- UPC 12: 078477370025
- Stock Status: NORMALLY STOCKED
- Brand: Leviton®
- Manufacturer: Leviton Manufacturing Co., Inc.
- Coverage: 2100 ft²
- Voltage Rating: 120/230/277 VAC
- Mounting Type: Wall
- Sensor Type: PIR
- Viewing Angle: 180 °
- http://www.leviton.com(Seller Home Page URL)
- Install Instructions URL - Leviton_ODS0D_IAW_Installation_Sheet.pdf(Install Instructions URL)
- Spec Sheet URL - 10962_ID-SPE-v1-ODS10-IDE.pdf(Spec Sheet URL)
- Safety Data Sheet URL - MSDS.pdf(Safety Data Sheet URL)
- Spec Sheet 1 URL - Leviton_ODS0D_IAW_Data_Sheet_1.pdf(Spec Sheet 1 URL)
- Tech Bulletin URL - Leviton_ODC0P_W_Technical_Bulletin.pdf(Tech Bulletin URL)
- Video - https://www.youtube.com/embed/vkM-Ppc9l-s(Video)
- Applications
- Features
| Commercial |
| Passive Infrared |
| Fits in standard wallbox and replaces 1-pole wall switch, gangable with other units |
| Low profile design eliminates obtrusive "scanning-device" look |
| Convenient pushbutton provides manual ON/OFF light switching at any time |
| Two dual element PIR sensors used to widen detection range |
| Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive "minor motion" area where even slight body movements will be detected |
| Vandal resistant PIR lens |
| Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required |
| Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for CEC title T24 energy savings |
| To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active |
| Time delay adjustment for delayed OFF time settings of 30 sec (for walking test), 10, 20 and 30 min, allows customized adjustments to maximize energy savings |
| Light sensor adjustable ambient light override ranges from approximately 20 to 5000+ LUX to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings |
| Light sensor enables the load hold OFF feature once level has been set |
| Vacancy confirmation when the time out expires and the lights turns OFF, a 30 sec vacancy confirmation exists to turn the lights back ON |
| False detection circuitry |
| Presentation mode feature for slide or film presentations allows pushbuttons to turn lights OFF and keep them OFF while the room is occupied |
| 1-unit can be used for 120 to 277 VAC lighting |
| Compatible with both electronic and magnetic ballasts |
| Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts |
| Exclusive Leviton® high inrush stability (HIS) circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service |
| No neutral design is optional for retrofit applications |