NSI 2107 Tork® 2100 Stem Photocontrol, 120 to 277 VAC, 2000 W Tungsten, 1800 VA Ballast, Surface Mount, Die Cast Zinc
Stem Mounting Photocontrols
301377
MFG #: 2107
NSI
33.42000
/ ea
- Amperage Rating: 15 A
- Catalog Number: 2107
- Contact Form: SPST
- Country of Origin: MEX
- Environmental Conditions: -40 to 140 deg F Operating Temperature
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 0.5500 lb
- Sensitivity: 1 to 5 FC On/3 to 15 FC Off
- Sensor Type: Cadmium Sulfide Cell
- Series: 2100
- Standards: UL 773AcULus ListedANSI Approved
- Timing Range: 2 mins
- Type: Stem
- UNSPSC: 39121524
- UPC 11: 78626160031
- UPC 12: 78626160031
- Wire Size: 16 AWG
- Stock Status: NONSTOCK
- Brand: NSI
- Manufacturer: NSi Industries, LLC
- Ballast Load: 1800 VA
- Material: Die Cast Zinc
- Mounting Type: Surface
- Tungsten Rating: 2000 W
- Voltage Rating: 120 to 277 VAC
- Features
| 1/2 Conduit Mount - Time Delay On And Off - Cadmium Sulphide Epoxy Coated 1 Diameter Cell |
| 600 VA LED lamp rating |
| 1/2 in Dia stem |
| Under 1 W power consumption |
| Conduit mount |
| Delay of up to 2 min to prevent false switching due to light from passing vehicles, lightning |
| Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants |
| Photocell responds to the light spectrum near to that of a human eye |
| Remain closed between dusk and dawn contact |
| Three color coded, minimum 6 in wire leads, rated for 105 deg C |