WattStopper® DW-100-W Single Relay Wall Mount Occupancy Sensor, 120/230/277 VAC, Dual Technology (PIR/Ultrasonic) Sensor
Wall Mount Occupancy Sensors
398175
MFG #: DW-100-W
WattStopper®
203.61000
/ ea
- Catalog Number: DW-100-W
- Color: White
- Connection Type: Flying Lead
- Control Output: Automatic On-Off, Manual On-Off
- Country of Origin: CN
- Dimensions: 2.73 in L x 1.76 in W x 1.83 in D
- Gross Weight Per Pack: 0.4000 lb
- Material: Plastic
- Power Rating: 1/6 hp
- Response Frequency: 50/60 Hz
- Series: DW-100
- Standards: RoHS CompliantUL ListedcUL ListedArticle No. 2011 NECECCN EAR99
- Temperature Rating: 35 °C
- Time Delay: 5 to 30 mins
- Type: Dual Technology
- UNSPSC: 39122236
- UPC 11: 75418291911
- UPC 12: 75418291911
- Stock Status: NONSTOCK
- Brand: WattStopper®
- Manufacturer: Legrand
- Coverage: 525 ft
- Mounting Type: Wall
- Sensor Type: Passive Infrared/Ultrasonic
- Viewing Angle: 180 °
- 5 Years(Warranty URL)
- http://www.passandseymour.com(Seller Home Page URL)
- Install Instructions URL - WattStopper_DW_100_B_Installation_Instructions.pdf(Install Instructions URL)
- Spec Sheet URL - ws-cutsheet-dw-100-dual-technology-wall-switch-sensor_22306.pdf(Spec Sheet URL)
- Tech Drawing URL - dw-100_wattstopper.zip(Tech Drawing URL)
- Video - https://www.youtube.com/embed/qsVCQV9uGKM(Video)
- Features
| Dual Technology |
| Zero crossing for long relay life |
| High sensitivity and dense coverage for exceptional performance |
| Color matched lens and low profile for appealing design |
| Selectable operation, walk-through, test and presentation modes for increased energy savings and convenience |
| Defaults to manual on operation for maximum energy savings |
| Part of a comprehensive line of PIR, Ultrasonic and Dual Technology wall switch sensors |
| 0 to 800 W at 120 VAC ballast/tungsten, 0 to 1200 W at 277 VAC ballast |
| Choice of manual on or auto-ON operation |
| Selectable walk through mode turns lights off 3 min after the room is initially occupied if no motion is detected after the first 30 s |
| Test mode allows quick and easy adjustments |
| Selectable audible alert for impending shutoff |
| In automatic mode, sensor returns automatically to auto-ON after lights are turned OFF manually, ideal for presentations |
| Four occupancy logic options give users the ability to customize control to meet application needs |
| Optional light level sensing with simple setup |
| Service mode allows sensor to operate as a service switch in the unlikely event of a failure |
| Sensor coverage tested to NEMA guide publication WD 7-2000 |
| Compatible with decorator wallplates |
| One relay and one on/OFF button |
| Magnetic or electronic ballast load type |
| Can turn lights off/on based on occupancy |