Leviton® ODS15-INE 1-Relay Wall Mount Occupancy Sensor, 120/277 VAC, Passive Infrared Sensor, 2100 sq-ft Coverage

Wall Mount Occupancy Sensors
1291764 MFG #: ODS15-INE
Leviton®
86.41000 / ea
10962_H7PNFCB5T4IDZ6Q2
  • Application: Commercial
  • ARRA Compliant: C
  • Buy American Compliant: C
  • Catalog Number: ODS15-INE
  • Color: Ivory
  • Country of Origin: MX
  • Currency: USD
  • Dimensions: 4.06 in H x 1.75 in W x 1.83 in D
  • Environmental Conditions: Operating Temperature (0 to +50 DEG C);Storage Temperature (-10 to +85 DEG C);Humidity (20% to 90% Non-Condensing)
  • EU RoHS Indicator: C
  • Frequency Rating: 50/60 Hz
  • Gross Weight Per Pack: 0.3800 lb
  • Gross Weight per Pack Metric: 0.17
  • Gross Weight UOM Metric: kg
  • Height: 4.62 in
  • Height [Metric]: 11.7475 cm
  • Lamp Type: Fluorescent/Incandescent
  • Length: 2.88 in
  • Length [Metric]: 7.3025 cm
  • Mounting: Wall
  • Power Consumption: 100 @ 120V;280 @ 277V MILWTT
  • Power Rating: 1800 W at 120 VAC/1800 VA at 120 VAC/4000 VA at 277 VAC/1/4 hp at 120 VAC
  • Replaced Catalog Number: ODS15-GDW
  • Response Frequency: 50/60 Hz
  • Size: 46 H x 1.75 W x 1.83 D IN
  • Standard: UL Listed;CSA Certified (24);FCC Regulations;NOM Certified
  • Standards: ARRA CompliantBuy American Act CompliantCSA CertifiedCEC ApprovedFCC ApprovedNAFTA CompliantNOM CertifiedUL ListedTittle 24 Compliant
  • Sub Brand: Decora
  • Supply Voltage: 120/230/277 VAC
  • Temperature Rating: 32 to 122 °F
  • Time Delay: 30 s to 30 min
  • Type: Occupancy Sensor;Single-Pole Switch
  • UNSPSC: 45111808
  • UPC 11: 07847748695
  • UPC 12: 078477486955
  • Width: 1.88 in
  • Width [Metric]: 4.7625 cm
  • Stock Status: NONSTOCK
  • Brand: Leviton®
  • Manufacturer: Leviton Manufacturing Co., Inc.
  • Coverage: 2100 ft²
  • Mounting Type: Wall
  • Sensor Type: PIR
  • Viewing Angle: 180 °
  • Voltage Rating: 120/230/277 VAC
The ODS15 uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain On as long as there is an occupant moving through the sensor zones.
QTY
Add to Wishlist
  • Applications
  • Features
Commercial
Fits in Standard Wallbox and Replaces Single-Pole Wall Switch, Ground Connection Required, Gangable with other Units, Low-Profile Design Eliminates Obtrusive "scanning-device" Look, Elegant Decora Wallplates Complement any Interior for Sleek Aesthetics, U
Fits in standard wallbox and replaces single-pole wall switch, gangable with other units, ground connection required
Low profile design eliminates obtrusive ''scanning-device'' look
Elegant Decora® wallplates compliment any interior for sleek aesthetics uses Decora® wallplates and coordinates with Leviton® popular line of Decora® wiring devices
180 deg field of view provides approximately 2100 sq-ft of coverage
Convenient pushbutton provides manual-on/off light switching at any time
Two dual element PIR sensors used to widen detection range
Segmented fresnel lens provides optimum sensitivity and performance
Designed with an extensive ''minor motion'' area where even slight body movements will be detected
Vandal resistant PIR lens
Horizontal field of view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
Manual-on/auto-off mode for installations where manual-on switching is required but auto-off switching is still desired for CEC Title 24 energy savings
Red LED indicator light flashes when sensor detects motion to verify detection is active
Time delay in adapting mode, the time delay can be configured from 30 sec (test mode), 5, 10, 20 min, in non-adapting mode, the delay can be configured from 5, 10, 20 and 30 min
Light sensor adjustable ambient light override ranges from approximately 20 to 5000+ lux to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings
Light sensor enables the load hold-off feature once level has been set
Vacancy confirmation when the time out expires and the lights turn Off a 30 sec vacancy confirmation exists to turn the lights back On
False detection circuitry
Presentation mode feature for slide or film presentations allows pushbuttons to turn lights Off and keep them Off while the room is occupied
Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
Exclusive Leviton® HIS circuitry, specifically designed to handle today's high inrush electronic ballast loads and offer unmatched durability and service