Maestro® Wireless® MRF2-6MLV-WH Low Voltage Magnetic Multi-Location Digital Fade Dimmer With RF Receiver, 120 VAC
Wireless Dimmers
539744
MFG #: MRF2-6MLV-WH
Lutron®
113.30000
/ ea
- Actuator: Tapswitch
- Application: Lighting Control
- ARRA Compliant: N
- Buy American Compliant: N
- Catalog Number: MRF2-6MLV-WH
- Color: White
- Connection: Screw Terminal
- Connection Type: Screw Terminal
- Control: Tap On/Off
- Country of Origin: MX
- Currency: USD
- Dimensions: 4-11/16 in H x 2-15/16 in W x 5/16 in D
- Enclosure: Plastic
- Environmental Conditions: 0 to 90% humidity, non-condensing. Indoor use only.
- EU RoHS Indicator: N
- Face Material: Metal;Plastic
- Finish: Gloss
- Frequency Rating: 50/60 Hz
- Gross Volume Per Pack: 0.04
- Gross Volume per Pack Metric: 0.00
- Gross Weight Per Pack: 0.2700 lb
- Gross Weight per Pack Metric: 0.14
- Gross Weight UOM Metric: kg
- Height: 4.50 in
- Height [Metric]: 11.4300 cm
- Insulation: Plastic
- Length: 2.30 in
- Length [Metric]: 5.8420 cm
- Material: Metal/Plastic
- Mounting: Wallbox
- Mounting Type: Wall
- Number Of Poles: 1
- Operating Temperature: 32 to 104 °F
- Power Rating: 600 W
- Series: MRF2-6MLV
- Size: 4.69 x 2.94 in
- Standard: UL, cUL, CSA, FCC, ICC
- Standards: UL ListedCSA CertifiedIndustry Canada CertifiedFCC Approved
- Start Type: Preset
- Sub Brand: Maestro Wireless
- Temperature Rating: 32 to 104 °F
- Terminal Type: Screw
- Type: Digital fade wireless dimmer, multi-location/single-pole
- UNSPSC: 39122206
- UPC 11: 02755766531
- UPC 12: 027557665315
- Wattage: 600 W
- Width: 2.30 in
- Width [Metric]: 5.8420 cm
- Stock Status: NONSTOCK
- Brand: Lutron®
- Manufacturer: Lutron Electronics Co., Inc
- Lamp Type: Halogen/Incandescent
- Operation Mode: Tap On/Off
- Sensing Range: 60/30 ft
- Switch Type: Tapswitch
- Voltage Rating: 120 VAC
The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provides a system that delivers energy savings, convenience, and ease of installation. Maestro Wireless dimmers and switches use Lutron patented Clear Connect™ RF Technology, which enables wireless communication with Radio Powr Savr™ sensors and Pico® wireless controls for light control and general switched loads.
- http://www.lutron.com(Seller Home Page URL)
- Install Instructions 1 URL - 10977_25KTHQ3SJLN0CGBD.pdf(Install Instructions 1 URL)
- Warranty URL - 10977_FACWP0X3TQZG6S52.pdf(Warranty URL)
- Tech Drawing URL - 10977_S63RCL7HTDIE9A4P.pdf(Tech Drawing URL)
- Spec Sheet URL - 10977_1QCW83VSR5JAL46P.pdf(Spec Sheet URL)
- Applications
- Features
| Lighting Control |
| Controls 600 W incandescent/halogen, or 600 VA (450 W) magnetic low-voltage loads. Tap on to preset level; tap off. Tap twice for full on. Press, hold, and release for delayed fade-to-off. Touch rocker to adjust light level. Provides true dimming from each location with companion dimmers or Pico wireless remotes. |
| Maestro Wireless® solution provides dimming/ switching of multiple load types, occupancy/vacancy sensing, daylight harvesting and high end trim |
| Lutron® patented Clear Connect® RF Technology works through walls and floors |
| Incorporates advanced features such as fade ON/fade OFF, high end trim and rapid full-on |
| Controls include Front Accessible Service Switch (FASS) for safe lamp replacement |
| Two wire dimmers and switches available for retrofit applications |
| Power failure memory if power is interrupted, the control will return to its previously set level prior to interruption |
| Relative humidity less than 90 percent non-condensing, Indoor use only Environmental Conditions |
| 6 A Lighting/3 A Fan (1/10 HP motor), Electronic Switch |