| Modern-styled, high performance fan, with sensing circuitry, that knows" when to ventilate the room; Sensaire technology detects the rapid rise in humidity over time; Humidity control automatically turns fan ON when either of these conditions is detected: a rapid to moderate (user adjustable) increase of humidity, humidity above user-adjustable set-point (50 - 80 PCT RH); Two wire manual operation for odor control turns fan ON when power line through wall switch is cycled ON, OFF and back ON; Remains ON for a user-adjustable 5 to 60 minutes after humidity has stabilized and is below set-point or after manually initiated through power line cycling; Saves energy because unit runs only for the time required; A unit controlled with a wall timer may keep fan ON longer than required or turn it OFF before room is sufficiently ventilated; Plug-in, permanently lubricated" |
| Modern-styled, high performance fan, with sensing circuitry, that "knows" when to ventilate the room |
| Sensaire technology detects the rapid rise in humidity over time |
| Humidity control automatically turns fan ON when either of these conditions is detected |
| Rapid to moderate (user adjustable) increase of humidity, humidity above user adjustable set-point (50 to 80% RH) |
| Two wire manual operation for odor control turns fan ON when power line through wall switch is cycled ON, OFF and back ON |
| Saves energy because unit runs only for the time required |
| A unit controlled with a wall timer may keep fan ON longer than required or turn it OFF before room is sufficiently ventilated |
| Plug-in, permanently lubricated motor engineered for continuous operation |
| Dynamically balanced centrifugal blower wheel for quiet, efficient performance |
| Innovative grille design with integrated humidity sensor |
| Durable steel reflector with white enamel finish |
| 33.5 W at 0.1 in, 33 W at 0.25 in |
| Polymeric duct connector with tapered sleeve and no metallic clatter |
| Sturdy, easy, four-point mounting directly to joist |
| Includes unique spacer (patent pending) for mounting to engineered "I" joists, hanger bars to position housing anywhere between 16 to 24 in on-center joists |
| Two sets of mounting holes for hanger bars allow flush installation with bottom or top of drywall |
| 110 cfm at 0.1 in SP, 90 cfm at 0.25 in SP |
