Banner Engineering SM2A312LV Maxi-Beam® 312 Photoelectric Sensor, Rectangle Shape, 5 m Sensing, Visible Red Sensing Beam
Photoelectric Retroreflective Sensors
13455
MFG #: SM2A312LV
BANNER®
172.39000
/ ea
- Catalog Number: SM2A312LV
- Connection Type: Cable
- Country of Origin: USA
- Enclosure Type: NEMA 1/2/3/3S/4/4X/12/13/IP67
- Environmental Conditions: 90% at 50 deg C
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 1 lb
- Light Source: LED
- Operating Temperature: -20 to 70 °C
- Sensing Method: Retro Reflective
- Series: 312
- Size: 65.8 mm L x 12 mm W x 33.3 mm H
- Standards: CE Marked, CSA Certified, cULus Listed, RoHS Complaint
- UNSPSC: 39121528
- UPC 11: 66248825964
- UPC 12: 66248825964
- Voltage Rating: 24/240 VAC
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: Switch
- Response Time: 4 ms
- Sensing Beam: Red Laser
- Sensing Range: 5 m
- Shape: Rectangular
Banner Engineering Maxi-Beam® Photoelectric Sensor, Series: 312, Rectangle, Retro Reflective Sensing Method, 5 m Sensing Range, Visible Red Sensing Beam, 4 ms Response, Switch Output, 24/240 VAC, 50/60 Hz, Cable, LED Light Source, 65.8 mm L x 12 mm W x 33.3 mm H, NEMA 1/2/3/3S/4/4X/12/13/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90 Percent at 50 deg C
- Features
| Rectangular with M18 barrel housing style; Compact, modulated, highly repeatable sensors; Choose standard visible model for highest excess gain and greatest range, or polarized models for detection of shiny objects; Switch-selectable for light-operate or dark operate; Low leakage current and saturation voltage; Physically and electrically interchangeable with 18 MM barrel-typephotoelectrics; Protected against false pulse on power-up and inductive load transients; Controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover; Totally encapsulated, O-ring sealing, and stainless steel screws; MINI-BEAMs may be destroyed from overload conditions; Use on low voltage requires careful analysis of the load to determine if the leakage current or on state voltage of the sensor will interfere with proper operation of the load; The |
| SPST SCR solid-state 2-wire output, 5 mA minimum load current, 300 mA to 50 deg C, 100 mA to 70 deg C maximum steady-state load capability, 3 A for 1 sec (non-repetitive) 10 A for 1 cycle (non-repetitive) inrush capability |
| Less than or equal to 5 V at 300 mA load and less than or equal to 10 V at 15 mA load on-state voltage drop |
| Compact, modulated, highly repeatable sensors |
| Choose standard visible model for highest excess gain and greatest range, or polarized models for detection of shiny objects |
| Switch-selectable for light-operate or dark operate |
| Low leakage current and saturation voltage |
| Physically and electrically interchangeable with 18 mm barrel-typephotoelectrics |
| Protected against false pulse on power-up and inductive load transients |
| Controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover |
| Totally encapsulated, O-ring sealing, and stainless steel screws, the false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts |
| MINI-BEAMs may be destroyed from overload conditions, use on low voltage requires careful analysis of the load to determine if the leakage current or on state voltage of the sensor will interfere with proper operation of the load |
| Self-contained non-polarized retroreflective mode photoelectric sensor |
| Less than 1.7 mA off-state output leakage |
| 4 ms on/off response time |
| 650 nm visible red LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 2 m cable connection |
| Thermoplastic reinforced VALOX enclosure |
| Light/dark operate |
| 18 mm barrel diameter, Self-contained |