Banner Engineering SE612LV Econo-Beam® SE61 Convergent Photoelectric Sensor, Rectangle Shape, 5 m Sensing, <10 ms Response Time
Photoelectric Retroreflective Sensors
168919
MFG #: SE612LV
BANNER®
154.59000
/ ea
- Catalog Number: SE612LV
- Connection Type: Cable
- Enclosure Type: IP66/NEMA 4X
- Environmental Conditions: 90% at 50 deg C Non-Condensing Maximum Relative Humidity
- Gross Weight Per Pack: 1 lb
- Light Source: LED
- Operating Temperature: 0 to 50 °C
- Sensing Method: Retro Reflective
- Series: SE61
- Standards: CE Marked, UL Listed
- Type: Convergent
- UPC 11: 66248826532
- UPC 12: 66248826532
- Voltage Rating: 10/30 VDC
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: Bi-Polar NPN/PNP
- Response Time: <10 ms
- Sensing Beam: Red Laser
- Sensing Range: 5 m
- Shape: Rectangular
The 1/2-inch diameter effective beam of retroreflective model SE612LV, measured at 1 foot from the lens, makes it a good choice for sensing relatively small objects when opposed sensing is not possible. The visible beam simplifies alignment to the retroreflective target. Use the largest retroreflective target possible. If sensing materials with shiny surfaces, scan at an angle of at least 10 deg to the shiny surface to minimize false light return ("proxing" effect).
- Features
| 650 nm sensing beam wavelength |
| 2 m cable connection |
| Small, low cost, self-contained sensors engineered to provide reliable sensing, primarily in straightforward OEM applications |
| Simple installation with no adjustments |
| Totally solid-state and epoxy-encapsulated for unlimited life |
| Very compact, yet rugged enough to withstand tough sensing environments |
| Protected against reverse polarity and transient voltages |
| 150 mA maximum output rating |
| < 1 uA off-state leakage current, < 1 V at 10 mA and < 2 V at 150 mA output saturation voltage(PNP output), < 200 mV at 10 mA and < 1 V at 150 mA output saturation voltage(NPN output) |
| Protected against false pulse on power-up |
| 100 ms delay at power up |
| 0.4 ms repeatability |
| Reinforced thermoplastic polyester (models LV, CV, F and FP) or polycarbonate (other models) housing, totally encapsulated for protection against moisture, vibration and corrosion |
| Non-polarized sensing mode |