Banner Engineering QS30ELVCQ WORLD-BEAM® QS30 Photoelectric Sensor, Rectangle Shape, 2 m Sensing, Visible Red Sensing Beam
Photoelectric Retroreflective Sensors
473926
MFG #: QS30ELVCQ
BANNER®
240.79000
/ ea
- Amperage Rating: 25 mA
- Catalog Number: QS30ELVCQ
- Connection Type: Quick-Disconnect
- Country of Origin: USA
- Enclosure Type: NEMA 6/IP67
- Environmental Conditions: 95% at 50 deg C
- Gross Weight Per Pack: 1 lb
- Light Source: LED
- Operating Temperature: -10 to 55 °C
- Sensing Method: Retro Reflective
- Series: QS30
- Size: 22 mm L x 33 mm W x 56.8 mm H
- Standards: RoHS Complaint
- UNSPSC: 39121528
- UPC 11: 66248881102
- UPC 12: 66248881102
- Voltage Rating: 10/30 VDC
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: Bi-Polar
- Response Time: 0.5 ms
- Sensing Beam: Red Laser
- Sensing Range: 2 m
- Shape: Rectangular
Banner Engineering WORLD-BEAM® Photoelectric Sensor, Series: QS30, Rectangle, Retro Reflective Sensing Method, 2 m Sensing Range, Visible Red Sensing Beam, 0.5 ms Response, Bi-Polar Output, 10/30 VDC, 25 mA, Quick-Disconnect, LED Light Source, 22 mm L x 33 mm W x 56.8 mm H, NEMA 6/IP67, -10 to 55 deg C Operating, Environmental Conditions: 95 Percent at 50 deg C
- Features
Rectangular with M30 barrel housing style; Protected against reverse polarity, over voltage, and transient voltages; Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up; Light Set for clear object detection; Reliable detection of clear, translucent, or opaque targets - including mirror-like surfaces; Automatic compensation algorithm compensates for dust or contamination on the sensor or reflector and for ambient temperature changes; Easy configuration via push buttons or remote wire; Easy-to-read operating status indicators; Compact housing, mounting versatility - 30 MM threaded barrel or side-mount |
Protected against reverse polarity, over voltage, and transient voltages |
Protected against output short-circuit, continuous overload, transient over-voltages, and false pulse on power up |
Light set for clear object detection |
Reliable detection of clear, translucent, or opaque targets - including mirror-like surfaces |
Automatic compensation algorithm compensates for dust or contamination on the sensor or reflector and for ambient temperature changes |
Easy configuration via push buttons or remote wire |
Easy-to-read operating status indicators |
Compact housing, mounting versatility - 30 mm threaded barrel or side-mount |
QS30 series clear object detection non-polarized retroreflective mode photoelectric sensor |
Less than 50 uA off-state output Leakage |
0.5 ms on/off response time |
660 nm visible red LED sensing beam |
Acrylic lens, 95 percent at 50 deg C (non-condensing) relative humidity |
5-pin integral euro-style quick disconnect connection |
Thermoplastic ABS enclosure |
Light/dark operate, bipolar (npn and pnp), 150 mA maximum load, npn - less than 200 mV at 10 mA and less than 1 v at 150 mA maximum load, pnp - less than 1.25 v at 10 mA and less than 2 v at 150 mA on-state saturation voltage |
30 mm barrel diameter |