Banner Engineering T18SN6DQ Ez-Beam® T18 Photoelectric Sensor, Rectangular Shape, 500 mm Sensing, Infrared Sensing Beam
Photoelectric Proximity Sensors
145496
MFG #: T18SN6DQ
BANNER®
88.07000
/ ea
- Amperage Rating: 25 mA
- Catalog Number: T18SN6DQ
- Connection Type: Quick-Disconnect
- Country of Origin: UKN
- Enclosure Type: NEMA 6P/IP69K
- Environmental Conditions: 90% at 50 deg C
- Gross Weight Per Pack: 1 lb
- Light Source: LED
- Operating Temperature: -40 to 70 °C
- Sensing Method: Diffuse
- Series: T18
- Size: 30 mm L x 30 mm W x 66.5 mm H
- Standards: CE Marked, CSA Certified, cULus Listed, Meets MIL-STD-202F Requirements
- UNSPSC: 39121528
- UPC 11: 66248834630
- UPC 12: 66248834630
- Vibration: 10 to 60 Hz
- Voltage Rating: 10/30 VDC
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: NPN
- Response Time: 3 ms
- Sensing Beam: Infrared
- Sensing Range: 500 mm
- Shape: Rectangular
Banner Engineering Ez-Beam® Photoelectric Sensor, Series: T18, Rectangular, Diffuse Sensing Method, 500 mm Sensing Range, Infrared Sensing Beam, 3 ms Response, NPN Output, 10/30 VDC, 25 mA, Quick-Disconnect, LED Light Source, 10 to 60 Hz, 30 mm L x 30 mm W x 66.5 mm H, NEMA 6P/IP69K, -40 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C
- Features
| Featuring EZ-Beam technology to provide reliable sensing without the need for adjustments; T style plastic housing with 18 MM threaded lens mount; Completely epoxy-encapsulated barrel-mount sensors operate on dc supply voltage and withstand harsh sensing environments; Advanced diagnostics to warn of marginal sensing conditions or output overload; Available in opposed, retroreflective, diffuse and fixed-field modes; Innovative dual-indicator system takes the guesswork out of sensor performance monitoring; 2 green and yellow LED indicators: green on steady - power to sensor is on, green flashing: output is overloaded, yellow on steady - N.O. output is conducting , yellow flashing - excess gain marginal (1 - 1.5x) in light condition; Adjustments: non-polarized retro and diffuse models (only) have a single-turn rear-panel sensitivity control (turn clockwise to incr" |
| Featuring EZ-BEAM technology to provide reliable sensing without the need for adjustments (most models) |
| T style plastic housing with 18 mm threaded lens mount |
| Completely epoxy-encapsulated barrel-mount sensors operate on dc supply voltage and withstand harsh sensing environments |
| Advanced diagnostics to warn of marginal sensing conditions or output overload |
| 10 - 60 Hz maximum, double amplitude 0.06 in, acceleration 10G vibration |
| Innovative dual-indicator system takes the guesswork out of sensor performance monitoring |
| 2 green and yellow LED indicators, green on steady - power to sensor is on, green flashing: output is overloaded, yellow on steady - N.O. output is conducting , yellow flashing - excess gain marginal (1 - 1.5x) in light condition |
| Non-polarized retro and diffuse models (only) have a single-turn rear-panel sensitivity control (turn clockwise to increase gain) adjustments |
| Protected against reverse polarity and transient voltages |
| Protected against false pulse on power-up and continuous overload or short circuit of outputs |
| 150 mA maximum (each) in standard wiring, less than 1 V at 10 mA dc, less than 1.5 V at 150 mA dc on-state saturation voltage |
| T18 series self-contained proximity diffuse mode photoelectric sensor |
| Less than 1 uA at 30 VDC off-state output leakage |
| 3 ms on/off response time |
| 880 nm infrared LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 4-pin euro-style quick disconnect connection |
| PBT polyester enclosure |
| Light/dark operate |
| 18 mm barrel diameter, Self-Contained |