Banner Engineering SM2A912DSRQD PHOTOELECTRIC S

Photoelectric Proximity Sensors
13499 MFG #: SM2A912DSRQD
BANNER®
292.32000 / ea
IDW_IMAGE_1480751670033
  • Catalog Number: SM2A912DSRQD
  • Connection: 3-Pin Mini-Style Quick Disconnect
  • Country of Origin: UKN
  • Enclosure: IP66, NEMA 1, 2, 3, 3S, 4, 4X, 12, 13, Reinforced Thermoplastic Polyester
  • Environmental Conditions: Relative Humidity: 90 PCT At 50 ° C (Non-Condensing)
  • Gross Weight Per Pack: 1 lb
  • Leakage Current: Off-State Output: Less Than 1.7 MILAMP RMS
  • Lens: Acrylic
  • Operating Temperature: -20 To 70
  • Output: SPST SCR Solid-State Switch
  • Size: 1.44 in Length X 1.4 in Width X 3.05 in Height
  • Sub Brand: VALU-BEAM
  • Type: 912 Series Diffuse Mode Photoelectric Sensor
  • UNSPSC: 39121528
  • UPC 11: 66248826572
  • UPC 12: 66248826572
  • Voltage Rating: 24 - 250 V
  • Stock Status: NORMALLY STOCKED
  • Brand: BANNER®
  • Manufacturer: Banner Engineering Corp.
  • Response Time: 4
  • Sensing Beam: 880 NMTR infrared LED
  • Sensing Range: 380
Valu-Beam 912 Series Diffuse Mode Photoelectric Sensor, Voltage Rating: 24 - 250 VAC, Sensing Range: 380 MM, Sensing Beam: 880 NMTR Infrared LED, Output: SPST SCR Solid-State Switch, Lens: Acrylic, Enclosure: IP66, NEMA 1, 2, 3, 3S, 4, 4X, 12, 13, Reinforced Thermoplastic Polyester, Response Time: 4 MS, Leakage Current: Off-State Output: Less Than 1.7 MILAMP RMS, Connection: 3-Pin Mini-Style Quick Disconnect, Size: 1.44 IN Length X 1.4 IN Width X 3.05 IN Height, Operating Temperature: -20 To 70 DEG C, Environmental Conditions: Relative Humidity: 90 PCT At 50 DEG C (Non-Condensing), Operation: Light/Dark, Repeatability: 2.6 MS, Output Rating: 10 MILAMP Minimum Load Current; On-State Voltage Drop: Less Than Or Equal To 5 V At 750 MILAMP Load And Less Than Or Equal To 10 V At 15 MILAMP Load; Inrush Capability: 4 AMP For 1 S (Non-Repetitive), RU Listed, CSA, CE Certified
QTY
Add to Wishlist
  • Features
AC models have an SPST solid-state output rated for up to 3/4 AMP with simple 2-wire hookup; Adjustments: sensitivity control potentiometer, both located at rear of sensor; Indicators: top-mounted red LED indicator lights when output is conducting