Banner Engineering Mini-Beam® SM2A31RL Receiver, Rectangle Shape, 30000 mm Sensing, Infrared Sensing Beam
Photoelectric Receivers
13470
MFG #: SM2A31RL
BANNER®
148.03000
/ ea
- Catalog Number: SM2A31RL
- Connection: 2 MR Cable
- Country of Origin: UKN
- Enclosure: IP67, NEMA 1, 2, 3, 3S, 4, 4X, 6, 12, 13, Reinforced Thermoplastic Polyester
- Environmental Conditions: Relative Humidity: 90 PCT At 50 ° C (Non-Condensing)
- Gross Weight Per Pack: 1 lb
- Leakage Current: Off-State Output: Less Than 1.7 MILAMP RMS
- Lens: Acrylic
- Operating Temperature: -20 To 70
- Output: Solid-State AC Switch
- Response Time: 2 ms On/1 ms Off
- Sensing Beam: 880 NMTR infrared LED
- Sensing Range: 30
- Size: 66 MM Length X 12.2 MM Width X 30.7 MM Height
- Standards: CE Marked, CSA Approval, UL Approval
- Sub Brand: Mini-Beam
- Type: Self-Contained Opposed Mode Receiver
- UNSPSC: 39121528
- UPC 11: 66248826061
- UPC 12: 66248826061
- Voltage Rating: 24 - 240 V
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
Banner Engineering Mini-Beam® Receiver, Rectangle, Opposed Sensing Method, 30000 mm Sensing Range, Infrared Sensing Beam, 2 ms On/1 ms Off Response, Solid State AC Switch Output, 24 to 240 VAC, Cable, LED Light Source, NEMA 1/2/3/3S/4/4X/6/12/13/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C Relative Humidity
- bannerengineering.com(Seller Home Page URL)
- Compliance Cert URL - Banner_SM2A30PRLQD_Compliance_Certificate.pdf(Compliance Cert URL)
- Spec Sheet URL - SPE_66248825992_Spec.pdf(Spec Sheet URL)
- Tech Drawing URL - DRW_66248826061_Tech.pdf(Tech Drawing URL)
- Warranty URL - WAR_Banner_Warranty.pdf(Warranty URL)
- Features
| Compact, modulated, self-contained opposed mode modulated infrared sensor pairs; Rugged, epoxy-encapsulated construction; Physically and electrically interchangeable with 18 MM barrel-type photoelectrics; Adjustments: 15-turn slotted brass screw gain (sensitivity) adjustment potentiometer (clutched at both ends of travel), both controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover; Indicators: red indicator LED on rear of sensor is on when the load is energized; Stainless steel screws" |
| Thermoplastic primary housing material |
| Light/dark operate |
| 300 us repeatability |
| Acrylic lens material |
| Potentiometer adjustment |
| 18 mm barrel diameter |
| Opposed mode receiver |
| Solid state AC switch input/output |
| 300 ms delay at power-up |
| 2 m cable connection |
| Rectangular with M18 mount |
| 2 m length cable connection |