Banner Engineering EZ-SCREEN® SLSCP30-750Q88 Safety Cascading Light Screen, 750 mm H Protected, 50 Beams, 821 mm OAH

Safety Light Curtains
301219 MFG #: SLSCP30-750Q88
BANNER®
2725.86000 / ea
Banner_EZ_SCREEN_SLSCP30_300Q88
  • Aperture Angle: +/-2.5 °
  • Catalog Number: SLSCP30-750Q88
  • Country of Origin: UA
  • Enclosure Type: IP65
  • Finish: Polyester Powder Coated
  • Gross Weight Per Pack: 1 lb
  • Housing Material: Aluminum
  • Light Source: Infrared LED
  • Mounting Type: Bracket
  • Output Current: 100/275 mA
  • Power Supply: 100 mA
  • Reset Type: High/Low Signal
  • Response Time: 17 ms
  • Safety Output Rating: 2 PNP
  • Standards: ANSI Standard, CE Marked, cULus Listed, NIPF, OSHA Certified
  • Storage|Operating Temperature: 0 to 55 °C
  • Supply Voltage: 24 VDC
  • UNSPSC: 32151804
  • UPC 11: 66248872447
  • UPC 12: 66248872447
  • Stock Status: NONSTOCK
  • Brand: BANNER®
  • Manufacturer: Banner Engineering Corp.
  • Number of Beams: 50
  • Operating Range: 0.1 to 18 m
  • Overall Height: 821 mm
  • Protected Height: 750 mm
QTY
Add to Wishlist
  • Features
EZ-SCREEN point-of-operation systems provide finger, hand and ankle detection in a robust housing and metal endcaps; Displays operating status, configuration error codes, and blocked beams; Resists impact, twisting, and abusive environments with durable aluminum housing or nickel-plated ESD-safe housing for protection against electrostatic discharges; Cascading models allow four systems of any length and resolution to be connected in a series, forming a single safety device; IP65 extruded aluminum housing with yellow polyester powder finish standard and well-sealed, rugged die-cast zinc end caps, co-polyester access cover; Remote test input- high signal: 10 - 30 VDC, low signal: 0 - 3 VDC, input current: 35 MILAMP inrush, 10 MILAMP maximum; Reset input- high signal: 10 - 30 VDC At 30 MILAMP typical, low signal: 0 - 3 VDC, closed switch time: 0.25 - 2 S; EDM input
EZ-SCREEN point-of-operation systems provide finger, hand and ankle detection in a robust housing and metal end caps
Displays operating status, configuration error codes, and blocked beams
Resists impact, twisting, and abusive environments with durable aluminum housing or nickel-plated ESD-safe housing for protection against electrostatic discharges
Cascading models allow four systems of any length and resolution to be connected in a series, forming a single safety device
IP65 extruded aluminum housing with yellow polyester powder finish standard and well-sealed, rugged die-cast zinc end caps, co-polyester access cover
Remote test input- high signal 10 - 30 VDC, low signal 0 - 3 VDC, input current 35 mA inrush, 10 mA maximum
Reset input- high signal 10 - 30 VDC At 30 mA typical, low signal 0 - 3 VDC, closed switch time 0.25 - 2 S
EDM input- high signal 10 - 30 VDC at 30 mA typical, low signal 0 - 3 VDC
All inputs and outputs are protected from short circuits to 24 VDC or DC common
Electrical safety class III
EZ-Screen components have passed vibration and shock tests according to IEC 61496-1
This includes vibration (10 cycles) of 10 - 55 HZ at 0.35 MM single amplitude (0.70 MM peak-to-peak) and shock of 10 G for 16 MS (6000 cycles)
10 - 30 VDC at 30 mA typical reset input high signal, 0 - 3 VDC low signal
2 PNP (trip/latch) safety output rating
100 mA maximum emitter power supply
(2) 8 GA Black Zinc Cold-Rolled Steel Swivel End Brackets mounting
M12
30 mm resolution
950 NMTR infrared LED light source
Plus/minus 2.5 deg at 3 m. Yellow polyester powder