Banner Engineering IM-T-11A IM-T Interface Module, 84 in H x 22-1/2 in W x 118 in D, 24 VAC/VDC, 300 mA, 2NO/1NC
Safety Control Modules
138455
MFG #: IM-T-11A
BANNER®
181.60000
/ ea
- Catalog Number: IM-T-11A
- Contact Rating: 300 mA at 60 VAC
- Country of Origin: USA
- Enclosure Rating: IP20/NEMA 1
- Gross Weight Per Pack: 0.5500 lb
- Indicator Type: Audible Alarm/LED
- Mounting Type: DIN Rail
- Operating Cycles: 100000 Cycles
- Series: IM-T
- Standards: CE Marked, UL Listed
- UNSPSC: 32151802
- UPC 11: 66248861424
- UPC 12: 66248861424
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Amperage Rating: 300 mA
- Contact Configuration: 2NO-1NC
- Input Type: Simultaneous/Concurrent
- Size: 84 in H x 22-1/2 in W x 118 in D
- Voltage Rating: 24 VAC//VDC
- bannerengineering.com(Seller Home Page URL)
- Compliance Cert URL - Banner_Engineering_IM_T_9A_Compliance_Certificate.pdf(Compliance Cert URL)
- Full Eng Drawing URL - Banner_Engineering_UM_FA_9A_Full_Engineering_Drawing.pdf(Full Eng Drawing URL)
- Spec Sheet URL - SPE_62822.pdf(Spec Sheet URL)
- Tech Drawing URL - Banner_Engineering_AT_FM_10K_Technical_Drawing.pdf(Tech Drawing URL)
- Warranty URL - WAR_product-warranty.pdf(Warranty URL)
- Features
| Interface Modules provide isolated safety output contacts for a primary safety device (e.g., a safety light screen or safety module) which has solid-state or hard contact outputs and external device monitoring (EDM) capability; Features two normally open redundant-output channels and one normally closed non-safety auxiliary output channel, all rated at 6 AMP; Normally closed outputs for connection to the primary safety device's monitoring input; Convenient plug-in terminal blocks; Supply protection circuitry: Protected against transient voltages; Overvoltage category: Output relay contact voltage of 1 V to 150 V AC/DC - Category III, output relay contact voltage of 151 V to 250 V AC/DC - Category II; AgNi and 5 UM gold-plated output contacts |
| Interface modules provide isolated safety output contacts for a primary safety device which has solid-state or hard contact outputs and external device monitoring (EDM) capability |
| Model IM-T-11A features two normally open redundant-output channels and one normally closed non-safety auxiliary output channel, all rated at 6 A |
| Normally closed outputs for connection to the primary safety devices monitoring input |
| 2.5 mm DIN-rail-mountable housing |
| Convenient plug-in terminal blocks |
| Polycarbonate primary housing |
| 50 mA power consumption |
| 20 ms response time |
| 2 pollution degree |
| Transient voltage supply protection |
| 10 to 55 Hz at 0.35 mm vibration |
| 50 deg C operating temperature |
| 90% at 50 deg C relative humidity |
| Removable terminal type |
| 2 green LED indicators power ON, K1/K2 energized |
| AgNi gold-flashed contacts |
| 20 mechanical life |