Banner Engineering GM-FA-10J GM-FA Monitoring Safety Module, 84 in H x 22-1/2 in W x 118 in D, 24 VAC/VDC, 300 mA, 2NO
Safety Control Modules
63963
MFG #: GM-FA-10J
BANNER®
408.83000
/ ea
- Catalog Number: GM-FA-10J
- Country of Origin: USA
- Enclosure Rating: IP20/NEMA 1
- Gross Weight Per Pack: 0.5400 lb
- Indicator Type: Audible Alarm/LED
- Mounting Type: DIN Rail
- Operating Cycles: 100000 Cycles
- Series: GM-FA
- Standards: Meets L991, ISO 14119, and ISO 13849-1 EN 954-1 Requirements
- UNSPSC: 32151802
- UPC 11: 66248860987
- UPC 12: 66248860987
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Amperage Rating: 300 mA
- Contact Configuration: 2NO
- Input Type: Simultaneous/Concurrent
- Size: 84 in H x 22-1/2 in W x 118 in D
- Voltage Rating: 24 VAC//VDC
- Features
| 0 |
| Monitors one or two safety switches for a contact failure or wiring fault |
| Two output switching channels for connection to control reliable power interrupt circuits |
| Auto reset or monitored manual reset |
| For use in functional stop category 0 applications per NFPA 79 and IEC 60204-1 |
| 6 amp safety output contacts |
| Plug-in terminal blocks |
| If terminal blocks are swapped, Module remains functional with no loss of safety function |
| Polycarbonate primary housing |
| 3 W/3 VA power consumption |
| 25 ms response time |
| 250 ms recovery time |
| 2 pollution degree |
| Transient voltage/reverse polarity supply protection |
| 10 to 55 Hz at 0.35 mm vibration |
| 50 deg C operating temperature |
| 90% at 50 deg C relative humidity |
| Removable terminal type |
| 2 redundant safety relay contacts outputs |
| 4 green LED indicators channel 1 and 2, K1/K2 energized, safety outputs closed, 1 red LED Fault |
| AgNi gold-flashed contacts |