Rees 04945-000 Heavy Duty Rope Operated Sequence Switch, 1NO-1NC
Cable Pull Switches
11917
MFG #: 04945000
REES
727.69000
/ ea
- Action: Slow-Make
- Catalog Number: 04945000
- Contact Rating: 6 A at 110 to 120 VAC, 3 A at 220 to 240 VAC, 1.5 A at 440 to 480 VAC, 1.2 A at 550 to 600 VAC, 2.2 A at 115 to 125 VDC, 1.1 A at 230 to 250 VDC
- Country of Origin: USA
- Dimensions: 5.38 in L x 4 in W
- Enclosure Type: NEMA 4X/IP66
- Gross Weight Per Pack: 1 lb
- Material: Polycarbonate
- Mounting Type: Conduit/Surface
- Standards: CE CertifiedCSA C22.2 File No. LR3648Demko File No. D-01496-M1IEC/EN 60947-5-1UL File No. E 58589/508
- Temperature Rating: 0 to 55 °C
- Terminal Type: 14 AWG Stranded Wire
- Type: Heavy Duty Manual Reset Slack
- UNSPSC: 39122205
- UPC 11: 64867149450
- UPC 12: 64867149450
- Stock Status: NONSTOCK
- Brand: REES
- Manufacturer: Rees, Inc.
- Contact Configuration: NC/NO
- Voltage Rating: 600 VAC/125 VDC
- Catalog URL - IDW_DOCUMENT_ea21e8b71e881e5a746ad9fd0327a5ebf7eeb63fb63b838078a6a39bda09de89.pdf(Catalog URL)
- http://www.reesinc.com/(Seller Home Page URL)
- Install Instructions URL - REES_04945_000_Installation_Instructions.pdf(Install Instructions URL)
- Spec Sheet URL - A%2004853-903_rev_D.pdf(Spec Sheet URL)
- Tech Drawing URL(Tech Drawing URL)
- Warranty URL - TermsPopup.aspx?cid=3969&plpver=10&pcat=&origin=Plp&lsid=50360424#TermsAndConditions(Warranty URL)
- Features
| This switch does not latch in any position and should only be used for non-emergency applications; The action of this switch is that when the switch actuating arm is pulled by a cable the switch contacts will change state, the NO will close and the NC will open; When the force on the cable is removed from the actuator arm, spring pressure will return it to its normal position, while the contacts are held in position through a ratchet mechanism; The next time the cable is pulled, the action is repeated and the contacts return to their original state; The housing and cover are made from a glass-filled black polycarbonate; The mounting base and double end actuator arm are die-cast from a high strength zinc alloy powder coat painted white; Each captive terminal on the replaceable contact block will accept (2) 14 AWG stranded wires; Unique "Pull-On", "Pull-Off" functi |
| This switch does not latch in any position and should only be used for non-emergency applications |
| The housing and cover are made from a glass filled black polycarbonate |
| The mounting base and double end actuator arm are die cast from a high strength zinc alloy powder coat painted white |
| Unique pull ON, pull OFF function |
| Gold plated contacts eliminate high resistance tarnishing |
| External steel components are made from no. 303 stainless |
| There are two 1/2 in NPT conduit openings |
| The maximum cable recommended cable length is 200 ft with a maximum interval support of 10 ft |
| The mechanical life of the switch is in excess of 150000 mechanical and 1000000 electrical operations |
| The rugged construction and long term reliability makes this cable pull switch well suited to function within various environments |
| Operating temperatures at 0 deg C are based on the absence of freezing moisture and liquids |
| -40 to 85 deg C storage temperature |
| 60, 30, 15, 12 A inrush current |
| 10 m maximum bluetooth range |
| 4.35 x 2.5 in mounting hole distance, 0.281 in hole |
| 2135 old catalog number |
| Slack cable style, slow make |
| 6 A/1.2 A at 110 to 120/550 to 600 VAC, 2.2 A/1.1 A at 115 to 125/230 to 250 VDC |
| 6 A/1.2 A at 110 - 120/550 - 600 VAC, 2.2 A/1.1 A at 115 - 125/230 - 250 VDC |