Rees 04944-600 Heavy Duty Cable Operated Switch, 2NO-2NC
Cable Pull Switches
106804
MFG #: 04944600
REES
900.77000
/ ea
- Action: Positive Break
- Actuator: T-Handle
- Catalog Number: 04944600
- Contact Rating: 6 A at 110 to 120 VAC, 3 A at 220 to 240 VAC, 1.5 A at 440 to 480 VAC, 1.2 A at 550 to 600 VAC, 2.2 A at 115 to 125 VDC, 1.1 A at 230 to 250 VDC
- Country of Origin: USA
- Dimensions: 3.9 in H
- Enclosure Type: NEMA 12/13/IP65
- Gross Weight Per Pack: 1 lb
- Material: Aluminum
- Mounting Type: Conduit/Surface
- Standards: CE Marked, CSA C22.2 File No LR 3648, Demko No D-01496-M1, IEC/EN 60947-5-1, UL 508 File No E 58589 Listed
- Temperature Rating: 0 to 55 °C
- Terminal Type: 14 AWG Stranded Wire
- Type: Heavy Duty Manual Reset Slack
- UNSPSC: 39122205
- UPC 11: 64867149446
- UPC 12: 64867149446
- Stock Status: NONSTOCK
- Brand: REES
- Manufacturer: Rees, Inc.
- Contact Configuration: 2NO-2NC
- Voltage Rating: 600 VAC/250 VDC
- Catalog URL - IDW_DOCUMENT_ea21e8b71e881e5a746ad9fd0327a5ebf7eeb63fb63b838078a6a39bda09de89.pdf(Catalog URL)
- http://www.reesinc.com/(Seller Home Page URL)
- Spec Sheet URL - A%2004853-900_rev_E.pdf(Spec Sheet URL)
- Tech Drawing URL(Tech Drawing URL)
- Warranty URL - TermsPopup.aspx?cid=3969&plpver=10&pcat=&origin=Plp&lsid=50360424#TermsAndConditions(Warranty URL)
- Features
| The housing is made from high quality die-cast aluminum and powder coated painted black; Gold plated contacts eliminate high resistance tarnishing; May be mounted for right or left hand pull; Each captive terminal will accept (2) 14 AWG stranded wires; Each switch is supplied with a fibreflex gasket which provides an oil tight seal upon installation; For added protection against corrosive environments a neoprene gasket is available as an accessory item by ordering part number 02005-540; There are two 3/4 IN NPT conduit openings; The maximum cable recommended cable length is 200 FT with a maximum interval support of 10 FT; This switch can be installed on various conveyor installations and provides a constant access for emergency or normal stopping; The rugged construction and long term reliability makes this cable pull switch well suited to function within various |
| This switch is particularly competent for use in emergency stop applications as well as for ordinary circuit control |
| The housing is made from high quality die-cast aluminum and powder coated painted black |
| Manual reset with positive break contacts |
| Gold plated contacts eliminate high resistance tarnishing |
| May be mounted for right or left hand pull |
| Captive terminal will accept (2) 14 AWG stranded wires |
| Each switch is supplied with a fibreflex gasket which provides an oil tight seal upon installation |
| For added protection against corrosive environments a neoprene gasket is available as an accessory item by ordering part number 02005-540 |
| There are two 3/4 in NPT conduit openings |
| The maximum cable recommended cable length is 200 FT with a maximum interval support of 10 FT |
| The mechanical life of the switch is 150000 operations |
| This switch can be installed on various conveyor installations and provides a constant access for emergency or normal stopping |
| The rugged construction and long term reliability makes this cable pull switch well suited to function within various environments |
| A600/N300 Heavy duty rating |
| -40 to 85 deg C storage |
| Operating temperatures at 0 deg C are based on the absence of freezing moisture and liquids |
| 6 A 110 - 120 VAC, 3 A 220 - 240 VAC, 1.5 A 440 - 480 VAC, 1.2 A 550 - 600 VAC at power factor 0.35 or less, 2.2 A 115 - 125 VDC, 1.1 A 230 - 250 VDC at inductive loads as specified in section 125 of industrial control devices, controllers and assemblies, ANSI/NEMA ICS 2-1988 |
| 60, 30, 15, 12 A inrush current, 10 lb trip force, 1.8 lb operating force between 10 ft supports |
| 2669 old catalog number |
| Slack cable style, '6 A/1.2 A at 110 - 120/550 - 600 VAC, 2.2 A/1.1 A at 115 - 125/230 - 250 VDC |