Banner Engineering UM-FA-11A UM Series Universal Input Safety Module, 7 A, 2NO-1NC Contact Form
Safety Relays
626586
MFG #: UM-FA-11A
BANNER®
258.61000
/ ea
- Catalog Number: UM-FA-11A
- Country of Origin: UA
- Dimensions: 84 mm H x 22.5 mm W x 118 mm D
- Enclosure Type: NEMA 1/IP20
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 0.5900 lb
- Mounting Type: DIN Rail
- Power Rating: 2 W
- Series: UM Series
- Standards: CE Marked
- Temperature Rating: 0 to 50 °C
- Terminal Type: Removable
- UNSPSC: 39121552
- UPC 11: 66248881228
- UPC 12: 66248881228
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Amperage Rating: 7 A
- Contact Form: 2NO-1NC
- bannerengineering.com(Seller Home Page URL)
- Compliance Cert URL - Banner_Engineering_UM_FA_11A_Compliance_Certificate.pdf(Compliance Cert URL)
- Spec Sheet URL - SPE_66248881227_Spec.pdf(Spec Sheet URL)
- Full Eng Drawing URL - Banner_Engineering_UM_FA_9A_Full_Engineering_Drawing.pdf(Full Eng Drawing URL)
- Warranty URL - WAR_Banner_Warranty.pdf(Warranty URL)
- Tech Drawing URL - Banner_Engineering_AT_FM_10K_Technical_Drawing.pdf(Tech Drawing URL)
- Features
| Monitors a wide variety of safety and non-safety input devices; Optical-based safeguarding devices, such as safety laser scanners; Positive-opening safety switches used for guard interlocking; Emergency-stop devices, such as palm buttons and rope/cable pulls; Standard sensors for non-safety applications, such as photoelectric monitoring position or end-of-travel; The safety inputs can monitor 24 VDC solid-state (PNP) outputs in single-channel or dual-channel hookup,24 VDC source that is switched by hard/relay contacts in single-channel or dual-channel hookup, Hard/relay contacts in a dual-channel hookup using terminals S11-S12 and S21-S22; Design complies with standards ANSI B11.19control reliability, ISO 13850 (EN418), and ISO 13849-1 (EN954-1) Category 4; Safety integrity level SIL 3 per IEC 61508/IEC 62061; Category 4 performance level PL e per ISO 13849-1; Pl |
| Polycarbonate primary housing |
| 10 to 20 mA at 12 VDC safety input - dual channel (dry contact), 5 to 20 mA at 18 to 28 VDC safety input - dual channel (solid-state), 40 to 100 mA at 24 VAC/VDC +/- 10% safety input - reset/safety input - single channel |
| Category 4 PLe; SIL 3 design rating |
| 1000000 cycles at 450 VA electrical life |
| 90% at 50 deg C relative humidity |
| Simultaneous or concurrent input operation |
| 2 NO (7 A), 1 NC (7 A) output configuration |
| 20000000 operations mechanical life |
| 25 ms response time |
| Transient voltage/reverse polarity supply protection |
| 24 VAC/VDC +/- 10% supply voltage |
| 10 to 55 Hz at 0.35 mm vibration |
| AgNi 5 um gold-plated contacts |
| 2 pollution degree |
| 250 ms recovery time |
| Monitors a wide variety of safety and non-safety input devices |
| Automatic reset or monitored manual reset, depending on hookup |
| Plug-in terminal blocks |
| Protected against reverse polarity and transient voltages |