Banner Engineering ES-FL-2A ES Series Emergency Stop Safety Module, 250 mA, 2NO-1NC Contact Form
Safety Relays
176827
MFG #: ES-FL-2A
BANNER®
313.75000
/ ea
- Catalog Number: ES-FL-2A
- Dimensions: 75 mm H x 45 mm W x 110 mm D
- Enclosure Type: NEMA 1/IP20
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 1 lb
- Mounting Type: DIN Rail
- Power Rating: 20 W
- Series: ES Series
- Standards: CE Marked, CSA Certified, UL Listed
- Temperature Rating: 0 to 50 °C
- Terminal Type: Fixed
- UPC 11: 66248846092
- UPC 12: 66248846092
- Stock Status: NONSTOCK
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Amperage Rating: 250 mA
- Contact Form: 2NO-1NC
Banner Engineering Emergency Stop Safety Module, Series: ES Series, 250 mA, 20 W, 50/60 Hz, 2NO-1NC, DIN Rail Mount, Fixed Terminal, NEMA 1/IP20, 0 to 50 deg C, 75 mm H x 45 mm W x 110 mm D
- Features
| Polycarbonate primary housing |
| 40 to 100 mA at 12 to 18 VDC safety input - dual channel (dry contact), 40 to 100 mA at 12 to 18 VDC (dry contact only) safety input - reset |
| Category 4 design rating |
| 100000 cycles at 1000 VA electrical life |
| 90% at 50 deg C relative humidity |
| Simultaneous or concurrent input operation |
| 2 NO (4 A), 1 NC non-safety (0.5 A) output configuration |
| 10000000 operations mechanical life |
| 25 ms response time |
| Transient voltage/reverse polarity supply protection |
| 24 VAC/VDC +/-15% supply voltage |
| 10 to 55 Hz at 0.35 mm vibration |
| One 2-channel type input |
| 2 channels output |
| Monitors two normally-closed emergency stop switch circuits for a contact failure or wiring fault |
| Input monitoring circuit uses a diverse-redundant design |
| Requires a reset routine for controlled re-application of power to the machinery as per ANSI standard B11.20-1991 |
| Two output switching channels for connection to control-reliable power interrupt circuits |
| Auxiliary non-safety contact for status monitoring by process controller |
| Protected against transient voltages and reverse polarity |