Banner Engineering ES-FA-9AA ES Series Emergency Stop Safety Module, 6 A, 3NO Contact Form
Safety Relays
64565
MFG #: ES-FA-9AA
BANNER®
240.92000
/ ea
- Catalog Number: ES-FA-9AA
- Country of Origin: USA
- Dimensions: 84 mm H x 22.5 mm W x 118 mm D
- Enclosure Type: NEMA 1/IP20
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 0.5250 lb
- Mounting Type: DIN Rail
- Power Rating: 2 W
- Series: ES Series
- Standards: CE Marked, CSA Certified, UL Listed
- Temperature Rating: 0 to 50 °C
- Terminal Type: Removable
- UNSPSC: 32151802
- UPC 11: 66248860131
- UPC 12: 66248860131
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Amperage Rating: 6 A
- Contact Form: 3NO
- bannerengineering.com(Seller Home Page URL)
- Compliance Cert URL - Banner_Engineering_UM_FA_11A_Compliance_Certificate.pdf(Compliance Cert URL)
- Full Eng Drawing URL - Banner_Engineering_AT_FM_2A_Full_Engineering_Drawing.pdf(Full Eng Drawing URL)
- Install Instructions URL - Banner_Engineering_ES_FA_11AA_Installation_Instructions.pdf(Install Instructions URL)
- Spec Sheet URL - SPE_60606.pdf(Spec Sheet URL)
- Tech Drawing URL - DRW_158545_pdf.pdf(Tech Drawing URL)
- Warranty URL - WAR_Banner_Warranty.pdf(Warranty URL)
- Features
0 |
Polycarbonate primary housing |
10 to 20 mA at 12 VDC safety input - dual channel (dry contact), 20 mA at 12 VDC (dry contact only) safety input - reset, 40 to 100 mA at 24 VAC/VDC +/- 10% safety input - single channel |
Category 4 PLe; SIL 3 design rating |
1000000 cycles at 450 VA electrical life |
90% at 50 deg C relative humidity |
Simultaneous or concurrent input operation |
3 NO (6 A) output configuration |
20000000 operations mechanical life |
25 ms response time |
Transient voltage/reverse polarity supply protection |
24 VAC/VDC +/- 10% supply voltage |
10 to 55 Hz at 0.35 mm vibration |
AgNi 5 um gold-plated contacts |
2 pollution degree |
250 ms recovery time |
Monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking |
The ES-FA-9AA has three normally open output switching channels for connection to control-reliable power interrupt circuits |
Automatic reset or monitored manual reset |
For use in functional stop category 0 applications per ANSI NFPA 79 and IEC/EN60204-1 |
6 or 7 amp safety output contacts, depending on mode |