Banner Engineering ES-FA-11AA ES Series Emergency Stop Safety Module, 7 A, 2NO-1NC Contact Form
Safety Relays
178989
MFG #: ES-FA-11AA
BANNER®
243.40000
/ ea
- Catalog Number: ES-FA-11AA
- Dimensions: 84 mm H x 22.5 mm W x 118 mm D
- Enclosure Type: NEMA 1/IP20
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 1 lb
- Mounting Type: DIN Rail
- Power Rating: 2 W
- Series: ES Series
- Standards: CE Marked
- Temperature Rating: 0 to 50 °C
- Terminal Type: Removable
- UPC 11: 66248802628
- UPC 12: 66248802628
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Amperage Rating: 7 A
- Contact Form: 2NO-1NC
- Compliance Cert URL - Banner_Engineering_UM_FA_11A_Compliance_Certificate.pdf(Compliance Cert URL)
- Full Eng Drawing URL - Banner_Engineering_EM_FD_7G3_Full_Engineering_Drawing.pdf(Full Eng Drawing URL)
- Tech Drawing URL - Banner_Engineering_GM_FA_10J_Technical_Drawing.pdf(Tech Drawing URL)
- Spec Sheet URL - Banner_Engineering_ES_FA_11AA_Specification_Sheet.pdf(Spec Sheet URL)
- Install Instructions URL - Banner_Engineering_ES_FA_11AA_Installation_Instructions.pdf(Install Instructions URL)
- Features
| Polycarbonate primary housing |
| 10 to 20 mA at 12 VDC safety input - dual channel (dry contact), 20 mA at 12 VDC (dry contact only) safety input - reset, 40 to 100 mA at 24 VAC/VDC +/- 10% safety input - single channel |
| Category 4 PLe; SIL 3 design rating |
| 1000000 cycles at 450 VA electrical life |
| 90% at 50 deg C relative humidity |
| Simultaneous or concurrent input operation |
| 2 NO (7 A), 1 NC (7 A) output configuration |
| 20000000 operations mechanical life |
| 25 ms response time |
| Transient voltage/reverse polarity supply protection |
| 24 VAC/VDC +/- 10% supply voltage |
| 10 to 55 Hz at 0.35 mm vibration |
| AgNi 5 um gold-plated contacts |
| 2 pollution degree |
| 250 ms recovery time |
| Monitors emergency stop devices, such as palm buttons and rope/cable pulls, and positive-opening safety switches used for guard/gate interlocking |
| The ES-FA-11AA has two normally open output switching channels for connection to control-reliable power interrupt circuits and one normally closed auxiliary output channel |
| Automatic reset or monitored manual reset |
| For use in functional stop category 0 applications per ANSI NFPA 79 and IEC/EN60204-1 |
| 6 or 7 amp safety output contacts, depending on mode |