Banner Engineering AT-FM-10K Duo-Touch® AT Series Safety Control Module, 150 mA, 2NO Contact Form
Safety Relays
134728
MFG #: AT-FM-10K
BANNER®
410.22000
/ ea
- Catalog Number: AT-FM-10K
- Country of Origin: USA
- Dimensions: 84 mm H x 22.5 mm W x 118 mm D
- Enclosure Type: NEMA 1/IP20
- Frequency Rating: 50/60 Hz
- Gross Weight Per Pack: 0.5300 lb
- Mounting Type: DIN Rail
- Power Rating: 3 W
- Series: AT Series
- Standards: CE Marked, CSA Certified, UL Listed
- Temperature Rating: 0 to 50 °C
- Terminal Type: Removable
- UNSPSC: 32151802
- UPC 11: 66248860698
- UPC 12: 66248860698
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Amperage Rating: 150 mA
- Contact Form: 2NO
- bannerengineering.com(Seller Home Page URL)
- Full Eng Drawing URL - Banner_Engineering_AT_FM_2A_Full_Engineering_Drawing.pdf(Full Eng Drawing URL)
- Spec Sheet URL - SPE_64137.pdf(Spec Sheet URL)
- Tech Drawing URL - Banner_Engineering_AT_FM_10K_Technical_Drawing.pdf(Tech Drawing URL)
- Warranty URL - WAR_product-warranty.pdf(Warranty URL)
- Features
| Diverse-redundant microcontrollers; Monitors two Banner STB Self-Checking Optical Touch Buttons, or two mechanical push buttons; Two redundant, forced-guided (mechanically linked) output contacts rated at 6 AMP; Feedback input monitors external machine control elements; 5 indicator LEDs for Power, Fault, input 1, input 2 and Output; Din-rail-mountable 22.5 MM wide housing with removable terminal blocks; 500 MS simultaneity requirement for touch-/push button operation; Supply protection circuitry: Protected against transient voltages and reverse polarity; Overvoltage category: Output relay contact voltage of 1 V to 150 V AC/DC - Category III, Output relay contact voltage of 151 V to 250 V AC/DC - Category II; AgNi and 5 UM gold-plated output contacts |
| Polycarbonate primary housing |
| 25 mA at 24 VDC (1 NO/1 NC per channel) safety input - dual channel (dry contact), 25 mA at 24 VDC (1 complimentary PNP pair per channel) safety input - dual channel (solid-state) |
| Type IIIc; Category 4; Ple; SIL 3 design rating |
| 1000000 cycles at 250 VA electrical life |
| 90% at 50 deg C relative humidity |
| Simultaneous <500 ms (500 ms typical) input operation |
| 2 NO (6 A) output configuration |
| 20000000 operations mechanical life |
| 35 ms response time |
| Transient voltage/reverse polarity supply protection |
| 24 VAC/VDC +/-15% supply voltage |
| 10 to 55 Hz at 0.35 mm vibration |
| 2 pollution degree |
| AgNi 5 um gold-plated contacts |
| 2 redundant safety relay contacts outputs |
| Diverse-redundant microcontrollers |
| Two redundant, forced-guided (mechanically linked) output contacts rated at 6 A |
| Feedback input for monitoring external machine control elements |
| 5 indicator LEDs for power, fault, input 1, input 2 and output |
| Protected against transient voltages and reverse polarity |