Banner Engineering Mini-Beam® SM312FP Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam, 1 ms Response Time
Fiber Optic Block Style Sensors
13452
MFG #: SM312FP
BANNER®
153.07000
/ ea
- Amperage Rating: 25 mA
- Catalog Number: SM312FP
- Connection Type: Cable
- Country of Origin: UKN
- Enclosure Type: NEMA 1/2/3/3S/4/4X/6/12/13/IP67
- Environmental Conditions: 90% at 50 deg C
- Gross Weight Per Pack: 0.4300 lb
- Light Source: LED
- Operating Temperature: -20 to 70 °C
- Size: 44.5 mm L x 12 mm W x 30.7 mm H
- Standards: CE Marked, CSA Certified, cULus Listed
- UNSPSC: 41112103
- UPC 11: 66248825916
- UPC 12: 66248825916
- Voltage Rating: 10 to 30 VDC
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: Bi-Polar NPN/PNP
- Response Time: 1 ms
- Sensing Beam: Red Laser
- Shape: Rectangular
Banner Engineering Mini-Beam® Fiber Optic Sensor, Rectangle, Visible Red Sensing Beam, 1 ms Response, Bi-Polar NPN/PNP Output, 10 to 30 VDC, 25 mA, Cable, LED Light Source, 44.5 mm L x 12 mm W x 30.7 mm H, NEMA 1/2/3/3S/4/4X/6/12/13/IP67, -20 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C
- bannerengineering.com(Seller Home Page URL)
- Full Eng Drawing URL - Banner_Engineering_SM312FP1H_Full_Engineering_Drawing.pdf(Full Eng Drawing URL)
- Warranty URL - WAR_Banner_Warranty.pdf(Warranty URL)
- Spec Sheet URL - SPE_66248825916_Spec.pdf(Spec Sheet URL)
- Tech Drawing URL - DRW_66248825916_Tech.pdf(Tech Drawing URL)
- Install Instructions URL - INS_52980_Ins.pdf(Install Instructions URL)
- Features
| DC-operated fiber sensor |
| Less than 1 uA off-state output leakage, less than 25 mA |
| Sensors will respond to either a light or dark signal of 1 ms or longer duration, 500 Hz maximum |
| 650 nm visible red LED sensing beam |
| Acrylic lens, 90 percent at 50 deg C (non-condensing) relative humidity |
| 2 m cable connection |
| 0.3 ms repeatability |
| Light/dark operate, bipolar (NPN and PNP) output, 150mA maximum each output at 25 deg C, derated to 100 mA at 70 deg C, (PNP output) less than 1 V at 10 mA and less than 2 volts at 150mA, (NPN output) less than 200 mV at 10mA and less than 1 V at 150 mA output saturation voltage |
| Complimentary outputs |
| Industry standard mounting holes |
| Reinforced thermoplastic polyester housing |
| 100 ms delay at power-up |
| Plastic fiber |
| 15-turn slotted brass screw Gain (sensitivity) adjustment |
| Alignment indicating device system (AID) lights A rear-panel mounted red LED indicator |
| Stainless steel screws |
| Protected against reverse polarity and transient voltages |
| Protected against false pulse on power-up and continuous overload or short-circuit of outputs |