Banner Engineering D12SP6FVY1Q D12 High Speed Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam, PNP Output
Fiber Optic Block Style Sensors
138548
MFG #: D12SP6FVY1Q
BANNER®
361.29000
/ ea
- Catalog Number: D12SP6FVY1Q
- Country of Origin: UKN
- Gross Weight Per Pack: 1 lb
- Standards: CE Marked, cULus Listed
- UNSPSC: 41112103
- UPC 11: 66248835508
- UPC 12: 66248835508
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
Banner Engineering Fiber Optic Sensor, High Speed, Series: D12, Rectangle, Visible Red Sensing Beam, 0.05/0.5 ms Response, PNP Output, 10 to 30 VDC, 45 mA, Pigtail Quick Disconnect, LED Light Source, 64 mm L x 12 mm W x 35.5 mm H, NEMA 2/IP11, -20 to 70 deg C Operating, DIN Rail Mount, Environmental Conditions: 90% at 50 deg C
- Features
| 35 mm DIN rail high power fiber optic sensors |
| Less than 10 uA at 30 VDC off-state leakage current |
| 0.5 ms on/off response time |
| 680 nm visible red LED sensing beam |
| Acrylic lens cover, 90 deg at 50 deg C (non-condensing) relative humidity |
| 6 in pigtail with 4-pin pico-style quick disconnect connection |
| 0.5/0.55 ms repeatability |
| Less than 1 V at 10 mA DC and less than 1.5 V at 150 mA DC on-state saturation voltage |
| 150 mA maximum (continuous) load |
| Light/dark operate, complementary PNP control output |
| Black ABS (Cycolac KJB) housing |
| False pulse protection circuit causes a 0.1 sec delay on power-up |
| Glass fiber |
| 15-turn slotted brass screw, clutched at both ends of adjustment |
| Two top-mounted LED indicators, green LED lights for DC power On, yellow LED lights for normally open output conducting, seven segment red LED moving-dot bargraph indicates received signal strength, output overload, and marginal excess gain, flashing led corresponds to the "on" state of the alarm |
| Protected against reverse polarity and inductive load transients |