Banner Engineering D12SP6FPHQ D12FPH High Speed Fiber Optic Sensor, Rectangle Shape, Visible Red Sensing Beam, PNP Output
Fiber Optic Block Style Sensors
142228
MFG #: D12SP6FPHQ
BANNER®
246.25000
/ ea
- Amperage Rating: 45 mA
- Catalog Number: D12SP6FPHQ
- Connection Type: Pigtail Quick-Disconnect
- Country of Origin: UKN
- Enclosure Type: NEMA 2/IP11
- Environmental Conditions: 90% at 50 deg C
- Gross Weight Per Pack: 0.1500 lb
- Light Source: LED
- Mounting Type: DIN Rail
- Operating Temperature: -20 to 70 °C
- Series: D12FPH
- Size: 64 mm L x 12 mm W x 35.5 mm H
- Standards: CE Marked, cULus Listed
- Type: High Speed
- UNSPSC: 41112103
- UPC 11: 66248834974
- UPC 12: 66248834974
- Voltage Rating: 10 to 30 VDC
- Stock Status: NORMALLY STOCKED
- Brand: BANNER®
- Manufacturer: Banner Engineering Corp.
- Output Type: PNP
- Response Time: 0.5 ms
- Sensing Beam: Red Laser
- Shape: Rectangular
Banner Engineering Fiber Optic Sensor, High Speed, Series: D12FPH, Rectangle, Visible Red Sensing Beam, 0.5 ms Response, PNP Output, 10 to 30 VDC, 45 mA, Pigtail Quick Disconnect, LED Light Source, 64 mm L x 12 mm W x 35.5 mm H, NEMA 2/IP11, -20 to 70 deg C Operating, DIN Rail Mount, Environmental Conditions: 90% at 50 deg C
- Features
| 35 mm DIN rail high power fiber optic sensors |
| Less than 10 uA at 30 VDC off-state leakage current |
| 0.5 ms on/off response time |
| 660 nm visible red LED sensing beam |
| Acrylic lens cover, 90 deg at 50 deg C (non-condensing) relative humidity |
| 6 in pigtail with 4-pin pico-style quick disconnect connection |
| 0.13 ms repeatability |
| Less than 1 V at 10 mA DC and less than 1.5 V at 150 mA DC on-state saturation voltage |
| 150 mA maximum (continuous) load |
| Light/dark operate, complementary PNP control output |
| Black ABS (Cycolac KJB) housing |
| False pulse protection circuit causes a 20 ms delay on power-up |
| Plastic fiber |
| 15-turn slotted brass screw, clutched at both ends of adjustment |
| Two top-mounted LED indicators, green LED lights for DC power On, yellow LED lights for normally open output conducting, seven segment red LED moving-dot bargraph indicates received signal strength, output overload, and marginal excess gain, flashing led corresponds to the "on" state of the alarm |
| Protected against reverse polarity and inductive load transients |